Jump to content

2 Position Recoil Tube for M1014


AmyV

Recommended Posts

If you already have the skeleton stock and are just looking for the recoil tube to allow the stock to collapse, then the 2 position tube is the correct part.

 

The third collapsible position that the seller is talking about may be the disassembly notch, which will lightly hold the stock in that location, but it is not a good idea to fire from this position.

 

I bought my 2 position tube from Numrich. There you can get either the complete assembly or just plain tube. If you buy the plain tube, you are going to need to transplant the recoil spring and other parts from the factory tube.

 

I bought the plain tube, but have been unable to remove the factory tube from my Limited Edition M1014. Just be aware that removal of the factory part can be a bit tricky.

 

Here's a link to the part I bought.

 

http://www.e-gunparts.com/DisplayAd.asp?chrProductSKU=1049680&chrSuperSKU=&MC=

Link to comment
Share on other sites

Guest cleefurd

The Numrich part has 3 notches; 2 for open and closed positions, 3rd "odd" notch is disassembly notch.

 

OEM 11707 tube has 4 notches; 3 for open, mid and closed positions, 4th "odd" notch is disassembly notch.

 

Additionally you will notice 2 "scribe rings on the Numrich part, and 3 "scribe" rings on the OEM part. They serve as "index" lines to eliminate guesswork on where to rotate the stock back into a "chosen" position.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...