Results 1 to 4 of 4

Thread: m4 magazine plug

  1. #1
    Join Date
    Dec 2008
    Posts
    7

    Default m4 magazine plug

    Does benelli sell a magazine plug for the m4? Gotta bring it down to 2 rds in the tube

    Matt

  2. #2
    Join Date
    Aug 2008
    Posts
    374

    Default

    Quote Originally Posted by awesomeame View Post
    Does benelli sell a magazine plug for the m4? Gotta bring it down to 2 rds in the tube

    Matt
    Go to a hardware store and get a 3ft long 1/4" dowel rod for $1 and cut to fit. Cheap and easy.
    If you aren't having fun then you obviously aren't shooting.

    "What's the worst that could happen?" FIERY CRASH!

  3. #3
    Join Date
    Dec 2008
    Posts
    7

    Default

    Do you think that will rattle around and make noise?

    Matt

  4. #4
    Join Date
    Aug 2008
    Posts
    374

    Default

    Quote Originally Posted by awesomeame View Post
    Do you think that will rattle around and make noise?

    Matt
    It does make a little noise, but it really is up to you on how much noise is acceptable. I have a dowel rod plug in my extended M2 and it only makes the noise of the rod sliding up/down the spring when I point the muzzle at the sky or at the ground. The deer I hunt don't seem to notice (I'm assuming hunting is the reason you would need to limit to 3). The other side of that is when you are fully loaded (3) the plug is very close to the follower so it doesn't have much room to travel to make noise.

    Unless you get leads on real plugs I would try it out, the worst that could happen is you are out $1 and a bit of time.
    If you aren't having fun then you obviously aren't shooting.

    "What's the worst that could happen?" FIERY CRASH!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •