RAIII Posted November 13, 2020 Share Posted November 13, 2020 Great info in this thread, thanks all. I recently purchased a new M4, but have been lurking here for months to learn as much as possible before starting to mod. I am leaning towards the Briley 8" currently for a handguard. While I have seen discussions here on pretty much all the handguards for the M4, I have not seen any on the B&T. Outside of this forum, I see quite a few higher end builds using them. Anyone have thoughts or experience with the B&T? Being Swiss made I assume one downfall is it doesn't count towards 922. Quote Link to comment Share on other sites More sharing options...
aznwhip Posted November 13, 2020 Share Posted November 13, 2020 38 minutes ago, RAIII said: Great info in this thread, thanks all. I recently purchased a new M4, but have been lurking here for months to learn as much as possible before starting to mod. I am leaning towards the Briley 8" currently for a handguard. While I have seen discussions here on pretty much all the handguards for the M4, I have not seen any on the B&T. Outside of this forum, I see quite a few higher end builds using them. Anyone have thoughts or experience with the B&T? Being Swiss made I assume one downfall is it doesn't count towards 922. Because pic quad rails are soooo 90s 1 Quote Link to comment Share on other sites More sharing options...
RAIII Posted November 13, 2020 Share Posted November 13, 2020 (edited) 11 minutes ago, aznwhip said: Because pic quad rails are soooo 90s LOL!! That was one of the first things that came to my mind too, but thought I would do a quick check. @aznwhip Me and another guy both got M4s together and are going to do builds on them. I am actually using your M4 as a model for what pretty much what I am going to do (when you had the CF Tube and Briley handguard). You saying the pic quad rail was sooo 90s made me crack up, when I showed my buddy the pic of your gun he said the CF tube was a little "2 Fast 2 Furious" for him. ? Edited November 13, 2020 by RAIII 1 Quote Link to comment Share on other sites More sharing options...
aznwhip Posted November 13, 2020 Share Posted November 13, 2020 (edited) You'll get that reaction often on the CF tube.... Mostly always from people who don't own M4s so don't understand how heavy a pig she is. CF tube makes a sizeable difference... Especially since its length of weight is wholly supported by your extended offhand. Edited November 13, 2020 by aznwhip Spelling Quote Link to comment Share on other sites More sharing options...
gm2376 Posted November 14, 2020 Share Posted November 14, 2020 On 7/4/2020 at 5:47 PM, aznwhip said: Performance Shooting HQ has this (and a ton of other Benelli Briley gear) on sale for 15% off with code "summer15off". Free shipping and no tax (although you might get charged tax if in Texas). https://www.performanceshootinghq.com/brileyhandguards.aspx Anyone know if they still have any promos going on? Ill call on Monday, but figured someone may know here. Quote Link to comment Share on other sites More sharing options...
PashaF Posted December 15, 2020 Share Posted December 15, 2020 I'm reviving this thread.... Does anyone have good pictures of the 8" handguard from the front? I'm not sure I like the opening/hole of it, compared how the OEM one is flush. Looks like Agency Arms' handguard addresses that better... Quote Link to comment Share on other sites More sharing options...
Rockinfigs Posted December 23, 2020 Share Posted December 23, 2020 I just ordered the 8 inch version along with the CF mag tube.. wanted to show off the CF tube so had to get the 8 incher:) il post some pics after I receive and install them 1 Quote Link to comment Share on other sites More sharing options...
Rtk1775 Posted April 5, 2021 Share Posted April 5, 2021 Hey, guys. Will the IWC mount with M600DF fit on the 8" Briley mount? Just ordered everything, but after studying photos, I'm concerned that it won't considering the Briley mount covers the barrel whereas the oem M4 mount tapers to the barrel leaving room for the tailcap.. Quote Link to comment Share on other sites More sharing options...
aznwhip Posted April 5, 2021 Share Posted April 5, 2021 22 minutes ago, Rtk1775 said: Hey, guys. Will the IWC mount with M600DF fit on the 8" Briley mount? Just ordered everything, but after studying photos, I'm concerned that it won't considering the Briley mount covers the barrel whereas the oem M4 mount tapers to the barrel leaving room for the tailcap.. Yes, the 8" handguard will work fine with the iwc mount and an m600. That was my exact setup at one point. You can check out on the Benelli M4 picture thread. 1 Quote Link to comment Share on other sites More sharing options...
Rtk1775 Posted April 5, 2021 Share Posted April 5, 2021 Thanks, aznwhip. Did you mount via picitinny or screw light directly on mount? Quote Link to comment Share on other sites More sharing options...
aznwhip Posted April 5, 2021 Share Posted April 5, 2021 (edited) 10 minutes ago, Rtk1775 said: Thanks, aznwhip. Did you mount via picitinny or screw light directly on mount? You have to use the pic mount for the tail to clear the guard. Edited April 5, 2021 by aznwhip 1 Quote Link to comment Share on other sites More sharing options...
Rtk1775 Posted April 5, 2021 Share Posted April 5, 2021 Dangit. Now I'm worried it'll sit too far from the gun.. I like everything nice and tight (joke in there somewhere). Quote Link to comment Share on other sites More sharing options...
aznwhip Posted April 5, 2021 Share Posted April 5, 2021 Just now, Rtk1775 said: Dangit. Now I'm worried it'll sit too far from the gun.. I like everything nice and tight (joke in there somewhere). Not nubile virgin tight, but not main street corner girl loose either lol It's honestly not bad. 1 Quote Link to comment Share on other sites More sharing options...
Rtk1775 Posted April 5, 2021 Share Posted April 5, 2021 ????? thanks for the pic. Reason why you moved away from the setup? Quote Link to comment Share on other sites More sharing options...
Rtk1775 Posted April 5, 2021 Share Posted April 5, 2021 14 minutes ago, aznwhip said: Not nubile virgin tight, but not main street corner girl loose either lol It's honestly not bad. Are you aware of any weapon lights the will mount on this setup without the pic rail? Quote Link to comment Share on other sites More sharing options...
aznwhip Posted April 5, 2021 Share Posted April 5, 2021 10 minutes ago, Rtk1775 said: ????? thanks for the pic. Reason why you moved away from the setup? I was able to luckily score an Agency handguard which fit my hand better. 1 Quote Link to comment Share on other sites More sharing options...
Rtk1775 Posted April 5, 2021 Share Posted April 5, 2021 10 minutes ago, aznwhip said: I was able to luckily score an Agency handguard which fit my hand better. Lucky indeed. Thanks a lot for the help! Quote Link to comment Share on other sites More sharing options...
StrangerDanger Posted April 5, 2021 Share Posted April 5, 2021 2 hours ago, aznwhip said: You have to use the pic mount for the tail to clear the guard. Do you think it would clear if the shroud was removed from the tailcap? Quote Link to comment Share on other sites More sharing options...
fatbiker852 Posted April 5, 2021 Share Posted April 5, 2021 On 12/22/2020 at 6:10 PM, Rockinfigs said: I just ordered the 8 inch version along with the CF mag tube.. wanted to show off the CF tube so had to get the 8 incher:) il post some pics after I receive and install them Let's see some pics Quote Link to comment Share on other sites More sharing options...
aznwhip Posted April 5, 2021 Share Posted April 5, 2021 12 hours ago, StrangerDanger said: Do you think it would clear if the shroud was removed from the tailcap? No, it would still hit from my testing. The height provided by the pic rail on the IWC mount and the pic connector on the light are greater than the lip of the cap and remaining gap. 1 Quote Link to comment Share on other sites More sharing options...
Rtk1775 Posted April 6, 2021 Share Posted April 6, 2021 On 4/5/2021 at 11:41 AM, aznwhip said: No, it would still hit from my testing. The height provided by the pic rail on the IWC mount and the pic connector on the light are greater than the lip of the cap and remaining gap. Shoulda asked the same question. Just bought the Rein thinking it may work without the IWC pic rail because it appears to not have a shroud as aggressive as SF. Perhaps I can get a hold of some longer screws and spacers to keep the light virgin tight to the weapon? Or dremel off a portion of the rail? ? Determined to make it work. Quote Link to comment Share on other sites More sharing options...
M2_shootr Posted April 11, 2021 Share Posted April 11, 2021 Why not use a pressure switch for the light? Use an mlok switch mount on the hand guard 1 Quote Link to comment Share on other sites More sharing options...
M2_shootr Posted April 11, 2021 Share Posted April 11, 2021 Would allow for a closer mounted light, and a better switch position Quote Link to comment Share on other sites More sharing options...
aznwhip Posted April 11, 2021 Share Posted April 11, 2021 35 minutes ago, M2_shootr said: Would allow for a closer mounted light, and a better switch position I have a Modlite Modbutton Lite. That was just an older picture I found to showcase clearance to answer a question. Quote Link to comment Share on other sites More sharing options...
M2_shootr Posted April 11, 2021 Share Posted April 11, 2021 Ah.....those are wonderful Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.