BenelliSBE Posted November 11, 2003 Share Posted November 11, 2003 Hello, Does anyone know a trick to allow the stock magazine in the SBE to hold 4 shells instead of 3? I heard that you would need to take the spring out and cut it a bit. (Doesn't sound right or good to me). Thanks for any ideas. Quote Link to comment Share on other sites More sharing options...
chomponthis Posted November 13, 2003 Share Posted November 13, 2003 It should say in the manual, my Benelli has it in there. Basically if you take the barrel off along with the retaining nut you should see a horseshoe shaped retainer with two small holes next to the split. You heed to compress this retainer using a pair of needle-nose pliers. Make sure that you are careful because there is quite abit of pressure behind it (you will need to keep pressure on it with your finger until you can slowly start to let it off, probably wear a pair of glasses while doing this just to be safe). when you get it off you should have access to the plug, which is the 3 inch or so piece of plastic. take it out and reassemble and your set! Let me know how it goes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.