Jump to content

KRL

Members
  • Posts

    24
  • Joined

  • Last visited

Everything posted by KRL

  1. What were they thinking! My SBE II aint going anywere till I buy a Maxus, Ill save $300.00 over the Vinci Browning gives you a Back Bored Barrel with the wonderfull Invector plus choke system softer recoil and 3.5" chambering, and i can still buy a couple cases of Hevi shot and have a few buck in my pocket when all is said and done. Again what were they thinking building the uglyest auto ever built and charging an arm and a leg for it! Kurt
  2. Shipped it out today UPS $32.00 fully insured. UPS ground. FedEx Blows! Thanks for the tip Mudhen. Kurt
  3. KRL

    unhappy

    Hi Unlucky Duck I have a SBE II and a Franchi 912 as a back up gun, the 912 has gotten a workout since I have had lots of trouble with my SBE II, My 912 has been better than I can ask, not one malfunction! I have shot everything from Cranes to teal with it. Congrats! on your new SBE. Mine will be heading to benelli this week. I hope they find the problem. Kurt
  4. Thanks I talked to Benelli Cust. service today they said FedEx did not know how to ship firearms worth a damb! it all depends on the person you get. it should be around $20 UPS ground. So off to UPS I go. Thanks Mudhen I will look at getting the new spring if this does not work out. Kurt
  5. I will look for another way to get my gun to benelli FedEx is a rip off! sounds like I may have other options. Kurt
  6. Sac. Ca. to Pocomoke MD. with FEDEX firearms must go priority overnight with adult signature required $122.00. Hey MudHen is there any one around Sac. that knows there way around Benelli's? I was thinking of ordering the 25% stronger recoil spring from Midway to see if that stops the link from getting chewed on and stop the Jamming? Kurt
  7. My gun is stovepiping and shaving metal off of the link from the bolt to the recoil spring as it enters the spring housing. Kurt
  8. Wow I just got off the phone with FedEx and cost to return my SBE II for warranty repair, was over $122.00! I cant afford that! My Gun has less than four hundred rounds throught it and it looks like it will be going up for sale, man that hurts, maybe I can find a closer service center? Kurt
  9. KRL

    unhappy

    What shells are you using if you are shooting Kents try Federals, Fast steel is cheap for a reason, Try Winchester Supremes or Frederal Premiums, for chokes you can get good deals on Tru Lock Precision Hunter tubes on Gun Broker or you can go with Briley or even Cabelas chokes they are made by Carlsons. But you are beating your head against a wall if you are shooting cheap shells and looking for good results. Kurt
  10. Ya I think something is out of time as well, Heavy oil light oil or dry only changes how it jams. My back up gun sure has gotten a workout since I bought my Benelli! Ill call customer service in the morning. Kurt
  11. Thanks Tucker I have done the cleaning aready, It sounds like im not the only one with the problem a coulpe guy's on the waterfowling site are having the same problem. Thanks, Kurt
  12. My Gun been thoroughly cleaned multiple times with gun scrubber and brushes when needed. The weather was about 60 degrees and dry and only a thin jacket on. Tucker we are talking about the same stovepipe the shell is hanging out at 90 degrees to the reciever. It was doing it with the empties before I cleaned the recoil spring, The action is much faster now, but it now is stovepiping the live rounds out of the magazine. Mostly on higher angle shots. Thanks, Kurt
  13. I just posted on the main forum about mine doing the samething, Looks like I am not the only one! My safe may have a Xtrema sitting were were my SBE now sits if I cant find a fix soon. Or Maybe a browning Maxus! I cant stand losing sailed birds do to a Jam! Kurt
  14. My SBE II has had problems with stovepiping since I have bought it and it has been cleaned completely with a full teardown, when it was new it would stovepipe the emties on the way out after cleaning it spotless including the recoil spring assembly the action is much faster but now it will stovepipe loaded rounds going into the chamber and it hits them hard putting a very large dent in the side of the loaded shell. It seems to happen only when shooting at around a Fourty Five degree angle. I have tried FP-10,CLP and the supplied Benelli oil, I switched brands of shells samething again but most often with 3" Steel. My Gun has less than 500 rounds through it, I had lost faith in it and just dont use it often but I thought It was working properly after the last cleaning but 15 rounds into a hunting this weekend I lost another winged bird to a jam! Help! any ideas? Thanks Kurt
  15. KRL

    SBEII Stovepiping HELP

    Ahh! there is that rain failure again, if mine still fails in the rain it will find a new home, and a Xtrema 2 will move in! Kurt
  16. KRL

    SBEII Stovepiping HELP

    Mine was jamming the first 100 rounds or so at the skeet range, after each of the first couple outings you should break it down and flush everything out real good with gun scrubber to knock all of the junk out that comes loose and you will feel a big differance in how smooth the action is ( if your gun is like mine anyways). they realy do need a good break in my gun is now very slick & smooth. I would stay away from FP-10, I jumped on the band wagon and it seems that was my problem it gets very milky & nasty when wet and seems to gather up anything that gets near your gun. some of my gas guns just seemed to cycle slow with it also. I test fired my gun yesterday with the loads that were failing and it's good to go now! (so far) I cleaned "everything" in the gun again & got rid of the FP-10 and used the Benelli supplied lube. It ejected every shell the same distance and cycled well. I havent had a chance to try it in the rain again but so far it looks like I found my problem. Follow the guy's like Tuckers instructions on how to lube your gun and hopefully you will be all set! Good luck Kurt
  17. KRL

    SBEII Stovepiping HELP

    After checking the recoil spring it was clean and and lubed with FP-10! but I did notice that when FP-10 gets wet it turns white & milky. on my last couple hunts it has been raining a little. has any noticed trouble with Benelli's in the Rain? Help Kurt
  18. Hello everyone I have a 6 month old SBEII that has started to stovepipe more and more it now happens every couple shots it started last weekend with Kent 1 1/8 oz 3's, I switched to Federals and now it's worse than ever. within one weeks time it went from once to constantly. HELP! I have completly torn it down and cleaned it with gun scrubber, I cleaned the chamber with a chambermate brush and a Dewalt Drill followed up with a light pass of Scotch Bright on the drill as well I also removed the stock to take a look at the spring i did not remove it, but it was well lubed and looked clean, I'm going to remove it today if it will come lose. I use FP10 and keep the gun very clean but i lost a big Bull Sprig the other day and a Green Head this Morning because of this now dont know that I can trust in the field again! If anyone has any suggestions PLEASE post up! Thanks Kurt
×
×
  • Create New...