Banjo MD
-
Posts
94 -
Joined
-
Last visited
Posts posted by Banjo MD
-
-
Bought a 3000 stf from Dicks. Took it out yesterday for the 2nd time and sometimes the top barel does not "set up". Is it possible I shoulderd it so tight that the inertia sysem does not work? any ideas?
You're confusing an inertia trigger switchover system of an O/U with the Benelli "Inertia Driven" system for autoloader bolt lockup and cycling. Different animals.
-
So, Sport Shooter, did you buy a gun?
If so, what'd you buy?
-
25 days and counting!
-
I just bought the Supersport...
Congratulations! You're gonna love it!
-
Nice; thanks, tucker:)
-
Just joshin'; (I did put a "smilie" at the end!)
-
You see what I get for getting on the web too early in the morning!
-
Is anyone else dissapointed with rust problems on their Benelli?
Rust in 6 hours!!! Unbelievable...
A few days ago I shot my Benelli in a snowstorm (I know, I shouldn't have!) Well, as I lined up on H1, a snowflake went in the barrel and immediately caused so much rust that the barrel was obstructed as I pulled the trigger and the gun blew up!
Do you think Benelli will replace it?
-
Never! (but I would buy a gun worth a million bucks for 2 grand no matter what it looked like!)pretty ugly gun.would you pay $2000.00 for this? I Think thats what your asking.
-
splash, would you pay $2000 for this?
http://www.luxurylaunches.com/auctions/45_luger_carbine_the_worlds_most_expensive_handgun.php
-
rodburner, you said "I want a bigger pattern." bigger than what? You don't know what size you have now. Establish a baseline so you can see the difference (is what I'm saying).
Your gun is shooting high if you're seeing that much rib that it is a "ramp". Establish the center of the pattern then shim the stock down; repattern and adjust as necessary.
You'll get it (unless your neck is 10" long!)
Good luck and keep us posted.
-
Pattern it appropriately with paper to establish a baseline, then make the appropriate changes and pattern again. It might save you a lot of tail-chasing! (You can't even be sure of what you're trying to change!)
-
Heck, I'm buying one just for the case!
-
Sounds like some time at the "Pattern Board" would save you a lot of grief!
-
Banjo see your rubbing off on me im starting to sound like you,
Hey, leftie, you could be worse off!
-
What I gleaned from this thread:
1/20/2009 Post is made about "garbage" product;
1/21/2009 Manufacturer offers to make good (no questions asked);
That, my colleagues, is Customer Service and why I'll buy from Dave's Metal Works in the future.
-
its somthing way over priced, that rusts when you think rain, and only clicks when you pull the trigger.
splash, You saying that it's not made by Benelli?
-
I meant that my post about under-the-barrel porting and Hollywood was a poor attenpt at humor.
-
But seriously, "ported at the bottom to ADD muzzle lift"?? This doesn't make good sense does it? I'm certainly no firearms expert, but the thought comes to mind... if that IS the actual result... why not port at the TOP and REALLY reduce muzzle lift. I would be very interested in your reply and ("Dean") Tucker's reply to this notion.
Sorry; poor attempt at humor/cynicism.
-
Is the barrel ported?
Yes, but it's ported on the BOTTOM of the barrel to increase muzzle lift (to better simulate Hollywood guns)
-
The new Vinci is a bolt action, 16 guage with a white Birch stock and standard full choke. It does have a never before seen floating barrel system. Comes with a 30" barrel, sling swivels and a package of lolli-pops.
I want 2!!
-
I want one!
-
in conclusion i DONT hate them...
Well you're OK, then.
-
No chip, just seeming contradictions. I've also run into people who hate Benellis for no real reason so I'm suspicious.
Jamming problems with super black eagle
in Benelli
Posted
My SuperSport will, if dirty, on occasion, lock the bolt back with a live shell on the carrier.
My fix is:
-Pull the trigger group,
-Spray clean,
-Lube lightly,
-Reassemble.
(Back to like-new!)