Georgio2125
-
Posts
11 -
Joined
-
Last visited
Posts posted by Georgio2125
-
-
hey thanks again, what sight combo is that exactly?
-
i was thinking of getting the tru glo magnum gobble dot snap on sights. anyone have any problems snapping them on over the camo finish? thanks
-
hey thanks for the tip. anyone have a recommendation for best sight with a vent rib camo finish...magnetic? snap on? etc
-
hey novaking, i just checked to see what the gun came with, its B shim set for right handed (which I am) i guess changing the shim would move it up but as far as making it shoot more to the right (5 inches) would it change?
-
hello all, i posted on the general forum but figured i should here also. I patterned my supernova today with 3.5" high velocity remingtons with a jellyhead choke. on all 10 shots, the my most dense area was about 3-5 inches left and a few inches down. i tried some with the jellyhead and some with the factory full choke. i evern tried a 2.75" inch load and a 3" load, same result. i had some else shoot and they were also in the same area. up and down i can live with but it was 3-5 inches left every single time. what should i try? i tired 5 shot and 6 shot no change. should i get a rear sight? should i try 4 shot? im stuck, thanks for the help
-
hello all, i patterned by supernova today with 3 1/2" rem high velocity...i shot from 25 30 35 40 45 and 50. every time the real center of my pattern was about 3-5 inches left and a little low of where i was aiming. i used my jelly head choke as well as the factory full choke (same results) thinking it was the ammo i tried with a 2 3/4 remington load and a 3" magnun rem load. still the same left everytime. The pattern is awesome its just not where it should be. my gun does not have a rear right, just the front red dot and bead in the middle. Im wondering what to do (new ammo, new choke, etc)?
Also, how should i clean my jellyhead choke, with a brass brush like the barell?
thanks
-
hey just a little update. After looking at my new supernova a little more. i noticed that on the entire left side of the trigger guard, the camo finish to not "stick" so at the factory they fixed it with a green/brown marker. there is quite a bit missing, do you think its worth doing anything about it? thanks
-
hey thanks for the reply. I figured it was all normal just wanted to make sure. I ended going back and looking at the floor model ones in my gander mountain and they were all the same. must be a hard process to get that camo on there, i wouldnt want that job haha
-
anyone notice the same thing when they got theirs?
-
I just received my new super nova from benelli. right out of the box i noticed a few minor scuffs and tiny "chips" in the camo finish. when i say minor they are just a couple small black scuffs. is this normal? thanks
super nova help
in Turkey Hunting
Posted
i had pretty tight pattern with a primos jellyhead and remington premier copper plated 3 1/2" #5s