mysbeII
-
Posts
26 -
Joined
-
Last visited
Posts posted by mysbeII
-
-
-
we do this all the time, my area is covered in Mallards, and late season makes it easier.
-
ive shot anything from 1.oz , 7 shot to 3 1/2 inch goose loads
-
-
Mine has done the same thing. I have noticed if I leave mine on ice, it will crack a little and kind of bubble open. But once it drys it goes back to normal. If your doesnt, I would call CS
-
I have an SBE II that is seven years old. I have over 10,000 rounds through it. If it clean I can shoot 1 oz without issues but after about 300 to 400 rounds I have to switch back to an 1 1/8. I consider myself lucky it will shoot that light of a load at all.
-
First of all I wasn't complaining about a free part just curious whey changed and yes I know the gun is not gas operated, I was referring to the ( unburied powder, gases etc)
-
I just purchased another super black eagle II for my son. Cleaning I noticed that the red follower in the magazine tube is now aluminum not plastic like mine. It also has a small hole in the bottom of it, won't this allow more gases to enter the magazine tube? Why did they switch?
-
Looking at purchasing a Super Vinci, those of you that have one, do you like it? Are you glad you bought one.....thanks in advance
-
Thank you, Thats just what I wanted to know
-
do you push out the extractor spring from the top of the locking bolt head or bottom? Im having a very difficult time getting the pin out.
-
Just got off the phone with Benelli, Theyare aending me all new springs to repalce in my gun and instead of a new extractor spring they are sending me a new bolt head...... now that is customer service, Thanks benelli
-
And I assume replace the with the plate being put in first then the spring inserted last throught he same hole?
-
Does anyone know the exact purpose of the ejector plate in the flange of the barrel? How it works?
-
anyone know how to take the extractor out of the bolt head so I can repalce the spring?
-
anyone know how to take the extractor out of the bolt head so I can repalce the spring?
-
Oh I will, i already tried, i have had great customer service with Benelli. Thaanks for the parts chart. Looks like parts 045G and 046M. But i sure as heck dont know how to get them out or the purpose of that part. I guess will will find out in the morning.
-
I have had a problem for the last few days with my SBE II hanging up on shells once in awhile. Its six years old and had 10,000 to 12,000 magnum loads put though it. I took it apart today after a hunt to clean it and noticed that inside the barell where the bolt action is, that there is a little spring coverd by a thin piece of metal. This thin piece has snapped in half, must be from all the magnum loads over the years, anyone else seen this? Figures a year over warranty, now looking to buy a new barell!!
-
You can order a SBE II with or without comfort stock, Can you also order the Super Vinci the same way?
-
I shot some over the weekend and am going back to my original winchester....... that stuff is deadly. You could actually see where it entered the bird form the outside. There were holes in the ducks breast while cleaning them, that i could stick my pinky in. Massive tissue trauma!.
-
I cleaned my SBEII just before dove season ( sept 1st) i have to date put 600 rounds through my gun even hunting at 9 degrees the other morning and it still runs like a champ.
-
-
-
I had a Benelli SBEII in the past that was like that. I couldnt hit my A@# with rice. I patterned the gun and it was way off. I sent it back to benelli and they repaired? replaced the barrell. Gun shot where i was looking after that. Id did take awhile to get it back, three weeks i think. Benelli test fires every gun before it leaves the factory, some people think this is to make sure it is on target. Its not, its to make sure the gun is working properly. Benelli will take care of it. Here is what I did. I put a full choke in and patterned my gun at 40 yards, I sent the patterns with the gun so they had a starting point to go off of. When they sent my gun back they sent me the pattern papers they used after the fix. I went back out to pattern again and it was dead on with what they did.
Post your pics
in Waterfowling
Posted
She has picked up one or two. She has gotten so used to picking up mallards that someone shot a teal last night ans she dropped it when she picked it up because it wasnt the same size or weight she was use to. I had to force her bcak to it to pick it up.