-
Posts
67 -
Joined
-
Last visited
Posts posted by Tom-Gun
-
-
Hi Unobtanium,
yes - you're absolutely right when it comes to the bolt modifications (lightening the bolt) - even the cameraman got a HIT in 10th sec. when ejecting the shell
Do you think is it only for 3gun purpose or this firearm could be also reliable in self defence scenario?
Thanks.
/Tom
-
Can someone post a pictures of the trigger group modified by SAI or TTI? They claim to take off 3lbs from the factory trigger. I would like to see that magic
Here's Costa running SAI Benelli M4:
-
Hi guys,
is it reallly worth paying extra $.$$$ for making mods on the Benelli shotgun in SAI or TTI company?
They offer:
- Custom Bolt Carrier
- Trigger Job, 3lbs taken off factory trigger
- Receiver loading port has been machined and polished for faster reloading, includes reload cut on the receiver to help keep the rounds centered for more accurate reloads
- Extractor and Barrel modifications to prevent jams
- TTI Custom Lifter/Shell Carrier
- Tune and polish shell catch
- Tune and polish carrier latch
- Taran Signature tube and barrel point of impact correction
- Forearm stippling
- Straight Stock Stippling
- Recoil Pad modified (eliminates snagging on clothing)
- Cheek pad for a comfortable cheek weld on Pistol Grip stock
- TTI Ultimate Safety
- TTI Oversized Bolt Release
- TTI Springs Package to enhance reliability with low recoil loads
- Nordic Extended magazine tube, clamp, and tuned spring, 7rd, 8rd, 9rd, or 10rd tubes
- TTI Ultimate Charging Handle
- Hi Viz fiber Optic, RED or GREEN front sight
- Test Firing with bird shot and slugs
- Gel recoil pad replace the rock-hard rubber factory pad
- Nordic Components Picatinny rail
- Benelli light-modified Crio (Plus) Choke
- Noveske QD-Sling Plate ( For Pistol-Grip Benelli Only )
- Match Saver
- Deburr and polish carrier window notch
- Trigger Guard access guide cut
and here's an example of a Benelli M2 from SAI:
[ATTACH=CONFIG]2690[/ATTACH][ATTACH=CONFIG]2689[/ATTACH][ATTACH=CONFIG]2688[/ATTACH][ATTACH=CONFIG]2687[/ATTACH][ATTACH=CONFIG]2686[/ATTACH]
Thanks for a comments.
-
You love it because it's tacticool or because it's effective? Did you notice some recoil reduction/muzzle flip reduction, etc.?I own a Royal Arms Brake and I love it -
Hi guys,
I can see that the brake has the holes all around the muzzle device. What about leaving the bottom part of the brake solid/without the holes, like it's solved in AR15 comps. Will it reduce muzzle flip? Thanks.
/Tom
-
Define stiff. I imagine your issue is related to the Shell Stop rather than the magazine spring. Do the shells push in easy until the rim of the round pushes into the magazine tube?
Hi SD,
yes - you were right. It's not the spring stiffness - it's the fault of the GG&G bolt release button with the shell stop included. I've checked carefully/slowly today. The shell stop resists when the shell rim meets the final few milimeters.
I have to grind it a little bit.
-
Carrier Comp sells a great spring for the M4 that has made my 10 shot M4 work like a charm. What spring do you currently have in it?
Benelli M4 OEM spring inside Benelli M4 OEM full magazine tube.
-
Truckcop, SD,
Thanks for your quick replies.
Ok - I'm gonna quickly clarify what I've got and how I'm doin' reloads:
Here's my shell carrier from AP Customs:
and as an example on this video below you can imagine how I'm trying to do the same feeding with my M4. Of course this guy is using different firearm & shell carrier, without the pistol grip which make loading easier:
When feeding the M4 tube I've struggled to push with my thumb 2x2 shells inside as quick as possible - so my first guess was weakening the spring by trimming some coils off, but now I know it can destroy the spring and cause some malfunctions.
Any ideas how can I modify my M4 for making same quick reloads?
-
Hey guys,
I'm using my Benelli M4 (M1014) mostly for 3Gun competition. I've figured out that the spring in magazine tube works a little bit too stiff for me. How can I improve it to make it lighter?, by trimming some coils off?
Thanks.
/Tom
-
Thanks VF, I've already purchased this item. I hope the manufacturer is H&K.
-
Guys, where I can buy those extended-threaded chokes? I would like to go for KA-1212 muzzle brake but first I have to arrange the choke? Thanks.
-
SD your chair is awesome
-
Hey guys,
is it really helping to reduce recoil? I think it works more like a muzzle brake than a compensator, right?
Can someone post a video shooting with & without this brake? Thanks.
/Tom
-
I'm still lookin' 4 it
-
I'm in! Holy cow
-
I have the 1/2 inch inch titanium bright FFT handle, I only have about 300 rds thru it with this handle, so far so good.I carry the original in my Messa stock along with a few other things. Just in case.
Thanks Gino! Any cons guys?
-
Hey guys,
because there is a high demand on Kip's charging handles and probably we won't see them very soon I'm considering to buy the FFT all titanium charging handle (http://freedomfightertactical.com/products-page/tactical-charging-handles/the-freedom-fighter-tactical-12-inch-diameter-finished-titanium-tactical-charging-handle/).
I know that steel detent would be nicer than titanium one - so the question is: how's a durability of this item?
Thanks.
-
My mistake on the name... #31 LII
Yes - I've figured it out
-
Remington makes them too. I bought a box of 25 from Brownells.... Just got to find them in stock somewhere.
Hi John,
thanks - they look very similar to Fiocchi's. Unfortunately out of stock at brownells.
-
Hey guys,
I'm looking for dummy rounds by Fiocchi like this:
[ATTACH=CONFIG]2185[/ATTACH]
-
Hey guys,
WTB slightly used or brand new.
[ATTACH=CONFIG]2184[/ATTACH]
-
Hello Reggie,
I will take the carriercomp charging handle - if possible of course buy it separately? Thanks.
-
That's lead on your patch. It has a silverish finish. You're fine with your cleaning routine. It's hard to screw up a smooth bored chrome lined barrel.
You're absolutely right SD! One more time I've cleaned carefully, brushing many times and I've noticed that what initially seemd to be a lack of chrome layer it was just a lead fouling Thanks.
-
Hi guys,
when cleaning the first time my M4 barrel (~ 30 slug shots for break in) I've noticed that I got some small chrome remains on the patch. Please see a pic below:
[ATTACH=CONFIG]2180[/ATTACH]
Is it normal? I'm using M-PRO 7 GUN CLEANER and bronze brush. Do you think the bronze brush did cause this damage. Shall I get rid of it and use only bore snake?
Thanks.
M4 was shinning today.
in Benelli
Posted
Hello M1014 --I like your heat shield, where can I get one like this?Thanks.BTW I got the Surefire handguard with rails on my Benelli. Will it fit this setup?