[WTS: IWC qd sling mounts x2]

On 10/17/2021 at 10:27 AM, Milspec said:

I take it you filed the edges/lip area where the screw holes are?  It doesn't look like there's a lot of material there.  One must have to file a small amount off each side or I think you'd be into the threads.  

Correct, it’s been a while since I did it. But I didn’t take much material off. Maybe 0.030 or so. Basically just removed the hard coat anodizing 

[M1014 pinned skeleton stock??]

He isn’t trying to disable the collapsible function. He is attempting to “unpin” one

[M1014 pinned skeleton stock??]

9 hours ago, RJHUB said:

Talking about using the stock on another M4 that does have notches.

Just wondering if anybody has details about removing pin.  And does that stock lock on notches for adjustment not just pinned on the end of tube.

It does look like the same stock with release button.

Need to post some pics for those questions

[Rmr vs t2 for m4]

RooftopDefense is GTG

 

 

[Co-witness mount on Benelli's for H1 / T1 / H2 /T2 footprint...?]

I’m not a HoloSun fan……I avoid Chinese when possible

I run Trijicon

[WTS: IWC qd sling mounts x2]

If one files the sling mount, it WILL seat properly and WONT gouge the stock body.

If you don’t care about gouges or plan on never removing the mount, it’s a non issue.

[M1014 pinned skeleton stock??]

Drive out the pin.

Many newer M1014 models will need a three position tube to allow the stock body to collapse 

It’s really all about the tube. If it has the position cuts, the stock body will collapse. The body has nothing to do with it.

[WTS: IWC qd sling mounts x2]

On 10/10/2021 at 5:42 PM, Milspec said:

Good to know about the screws.  I'm more curious how the recessed part of the QD fits.  Does it insert fully/flush into the slot?

I was under the impression that this was the piece that's giving everyone fitment issues.

I'm just looking at pictures and thinking about how it fits.  So my apologies if I'm talking out of my behind.

 

 

Mine needed a bit of persuasion. I believe I had to file it a bit. Installed on  newer m1014 “blue receiver” m4

[Is the Limited Edition M1014 Model actually Limited?]

[The end of NP3 for end users at Wright]

Meh……CeraCoat for me

[Is the Limited Edition M1014 Model actually Limited?]

The flag was enough for me…..love it

[Good sight for benelli M4?]

ScalarWorks and RMR is the best I’ve tried thus far. It just works

[WTS: Benelli M1014 (M4). Many upgrades and never fired.]

What was the sale price?
Woukd be nice if these weren’t removed from listings. Allows for analysis of what the market is buying/selling for

[Best Benelli M4 Trigger?]

1 hour ago, Unobtanium said:

Honestly, I think OEM in an aluminum OEM trigger guard is the way to go.

Could you expound on the thoughts?

[Dave's Metal Works= GARBAGE]

Wow……a 12 year old rant 

 

Aint this a peach

[Benelli M4 OEM Alumin trigger housing coated with NP3 avail at FFT]

Quality parts

Small runs, as in not made in the tens of thousands, they will be expensive.

One doesn’t HAVE to buy his parts. 

[Benelli Supernova Top Rail Threads]

Ok…..

[Anyone used the Battle Steel top rail on their M4? Questions...]

Hey, that mount is made in USA. Thats about all it has going for it

[Anyone used the Battle Steel top rail on their M4? Questions...]

19 hours ago, jtb33 said:

I know it's made in China.  I know that Holosun is made in China.  I know a lot of people don't like Botach for this reason or that reason.  I'm not looking for the sanctimonious tripe regarding me purchasing Chinese items; we have ALL purchased and owned Chinese stuff, whether it's the Norinco AK or SKS, or the box of crayons and coloring book purchased from Wal-Mart.

Also, I do know ScalarWorks has a couple Benelli M4 mounts that are more than twice the cost, but not this same design.  I bought this one because it was advertised to work with Holosun's, which I have - and like the design of this one with the half-rail.  The cost was attractive as well and I don't mind ordering from Botach.

That said, moving on to the actual question and issue I asked about; I'm guessing that this will only work with the Holosun red dots that don't use the battery tray under the optic since that raises the height a bit...  and even in the best situation, with the most low profile mount and low profile optic, it's still lower than a lower 1/3 cowitness based on the pics on Scalarworks site of the view in those instances.

So perhaps the real answer is that a functional cowitness on a Benelli M4 hasn't been designed yet, and maybe there's a reason for that.  I guess most just put it on the factory rail and don't worry about cowitness.  I may just have to do that.  

Footprint of the Holosun is the same as an RMR

 

Not knocking you, but I learned years ago, quality is not cheap. Buy once cry once. Cheap components and optics are rarely worth the hassle. A 12ga is brutal on optics.

[Anyone used the Battle Steel top rail on their M4? Questions...]

Buy a ScalarWorks rail, they designed it. 
 

Botach is a horrible company to deal with.

[WTB: Looking for an m4 AVA light mount]

Still looking…….

[WTB: Looking for an m4 AVA light mount]

Looking for an m4 AVA light mount for a friend. Please let me know if you have one you would like to sell

 

thanks in advance

[Cheap heat shield for M4]

Cool…..

 

[For my fellow Precision Rifle shooters here.]

Wow….an awesome setup

[Supernova Tactical 922r]

10 hours ago, kwb377 said:

The 922r code specifies "semiautomatic rifle or shotgun", so you should be good to go. However, I wouldn't put it past the ATF to "interpret" a pump action as being "semi" automatic. 

Not quite correct here Sir