-
Posts
140 -
Joined
-
Last visited
Posts posted by Scalarworks
-
-
20 hours ago, LIONHART said:
Don't know for sure. We'll have to order one from Aimpoint to test out to give you a definitive answer.
- 1
-
11 minutes ago, Kenneth lambert said:
Where can I purchase it and how much is it
https://scalarworks.com/shop/integral-mounts/sync-01/
$119. We also have a Micro T-2 compatible version. Check the website for details.
-
7 minutes ago, SnidelyWhiplash said:
Will the RM33 mount raise the Trijicon RMR high enough so that the ghost sights DO NOT co-witness ? I have trouble with the co-witness view being too busy and want my RMR mounted above the ghost ring sight-line but I’m thinking the RM34 mount might be higher than practical?
Correct. No Picatinny mount will allow for a co-witness. They will also throw off your cheekweld by raising the RMR as much as they.
-
Does anyone sell the newer sync mount for the RMR in FDE? Also, does anyone have any of older BOR 100s for sale? I think older mount looked much better even if it may not function as well.
Forum member StrangerDanger specializes in that sort of thing.
-
You'll have it in a few days. Let us know how you like it!
-
I have the first Scalarworks RMR picatinny mount on my Benelli M4, but never actually bought the RMR for it.
I also have an Aimpoint H1 on my BCM AR sitting on a Scalarworks LDM.
Was thinking of buying a T2 for the AR and getting a Sync for my Benelli M4 and putting the Aimpoint H1 on it.
For those who have both, is the centered dot height identical on the T1/H1 and the T2?
The newer H2/T2's optical center is 1mm higher than the older H1/T1's. Aimpoint thickened the base when they updated the design.
The Sync/Micro will work with both.
-
Being a Trijicon OEM partner has it's privileges:
The new Type 2 RM06 won't be officially released until mid-July but Scalarworks has a small supply of them in-stock and ready to ship right now.
https://scalarworks.com/shop/optic-bundles/sync-trijicon-rmr-bundle/
The Trijicon RMR Type 2 has an all new battery compartment and electronics.
-
-
On the burnt bronze, it has a Carriercomp bolt handle and a DMW oversized safety.
I took her out all weekend on a camping trip in the Mojave. Really liking the new rail for the RMR.
Thanks, SD. Really glad you like the new mount.
-
Installed the aimpoint micro version yesterday. Makes for a perfect co-witness using the full length field, pistol grip, and fully extended collapsable stock. The middle position on the collapsible stock ends up putting the cheek weld just a little too high. Product is well finished and installation is a breeze. Hope to go shooting tomorrow. Nice Job Scalarworks.
Thanks, Tinman. Glad you like it so far. Post up some pics from the range if you take any.
-
[ATTACH=CONFIG]3232[/ATTACH]Struggling with posting pictures here...
I feel your pain. Getting that front sight post and rear ghost ring in something resembling focus is really challenging.
Thanks for posting these pics.
-
It does mount with 4 screws. Please scroll down the product page to the "strength in numbers" section on your desktop/tablet in landscape mode (mobile version doesn't show this well yet- we will fix it tomorrow). https://scalarworks.com/optic-mounts/sync-benelli/
-
Also love the locking lugs. Will those screws have stops on them so you now when they are seating properly?
Thanks. They do have a shoulder to prevent over-penetration into the receiver. On most shotguns we've tested that also coincides with the slot height, but on others you will have to adjust the height a bit to suit the slots.
It's all spelled out in the installation instructions. No big deal.
-
Thanks for not shipping to Canada. Can you please send me a PayPal invoice via PM so we can get it out. Thanks.
We don't ship to Canada because we have a Canadian distributor: https://rampartcorp.com/
They will have the Sync in stock by next week. Please check back with them then.
-
We had some technical issues with the site but it's working now. Thanks for your patience.
-
Just ordered mine!
You are the one and only person to have been able to order one so far.
The website is slow as molasses and the mounts are showing as out of stock. We don't know why yet but we're working on it.
Thanks for your understanding.
-
Technical difficulties. Please stand by.
-
Mounts just went live. We have to stagger them or the server explodes trying to send that many emails at once.
-
-
I'm not them but the primary purpose of a rail on the receiver was for mounting an optic. With the optic mount integrated into the rail, the rail really became superfluous. Hence the redesign to omit the rail portion. That's my guess anyway.
That too. You could put a light or sling mount on there but in practice both of those options sucked.
-
I have tried to read through this thread....so the original mount is being replaced with the Sync mount? Can you still get the original? Why was it redesigned?
We re-designed our original RMR mount for several good reasons:
1- To bring the RMR even lower to the receiver so that it could co-witness all the way down to the lowest rear iron sight setting.
2- To provide the RMR with an air-tight platform to sit on and guarantee a water tight seal.
3- To make the whole thing smoother and lighter weight.
4- To have a design that could potentially accommodate an Aimpoint Micro platform.
-
lol. You are correct. I meant "affirmative", not "absolute co-witness".
For anyone keeping track; we have photos up of production Syncs and Sync bundles on our website. https://scalarworks.com/
I'm happy to announce that we will meet our revised launch date and are working tirelessly to beat it. Stay tuned!
-
Will the T1 mount co-witness with the irons at all?
Absolutely!
-
Any idea when the images of the T1 mount will be released?
Hopefully this Sunday (3/12/17). Monday at the latest (3/13/17).
BENELLI OPTIC RAIL The decisive Trijicon RMR mount for the Benelli m4
in Benelli
Posted
We're expecting more in the last week of October. Please sign up for the auto-notify on our site to ensure you don't miss it.