Jump to content

NoTycoon

Members
  • Posts

    167
  • Joined

  • Last visited

  • Days Won

    7

Everything posted by NoTycoon

  1. Better news, the M4 and Hellcat recoil parts arrived today. Just in a different package and with no tracking information. Now I just need for the weather to clear so that I can get out to the range.
  2. Good news, and bad. My package finally arrived from Israel. It only contained my second order for my XDm. No parts for the M4, nor the Hellcat.
  3. Welcome to the forum and enjoy your M4. Read through a lot of the posts here to get ideas on what you may want to do.
  4. OK, my parts have landed in the US at a USPS facility in Wisconsin.
  5. Perhaps the gunbroker merchant is waiting for a shipment from Greece.
  6. Any update? Mine are still stuck in Greece.
  7. There is an M4 with factory extended mag tube on VA Gun Trader for $2400.
  8. There is an M4 with factory extended mag tube on VA Gun Trader for $2400.
  9. I bought a used ATI package for my M4. The stock was too heavy, the tube only added one round, and the tri-rail would not stay tight. The only parts I have kept, and still use, are the forend and heat shield. If you can find these, buy them.
  10. If that fits, they are even cheaper on amazon prime for same 50 pc.
  11. TacStar SideSaddle Shotshell Ammunition Carrier 12 Gauge Six Round Carrier For Benelli M4 Aluminum Matte Black The TacStar original SideSaddle shotshell ammunition carrier allows you to easily mount additional ammunition directly to the side of your shotguns receiver. This convenient location allows you quick access to additional shells since carrying additional shotshells can sometimes be cumbersome. The backing plate is made from aircraft grade aluminum and the polymer shell holders are virtually indestructible. The mounting of the side saddle is easy and does not require the use of a gunsmith. Mounting bolt replaces trigger retaining pin. $20 OBO.
  12. I assume this is what you are talking about.
  13. I've got one that I took off of my M4. PM me with where to send it. Once you have it, send me whatever you think it was worth.
  14. The parts that have broken on me and that I now carry spares for are: Carrier Latch and Bolt Handle.
  15. Following my order with Zahal (and the 12% discount offered on the site banner), they sent me a discount code for 25% off. One of you may want to use FLASH25 to order yourself one of the recoil reduction rods.
  16. Could not wait to hear how it works. I went ahead and ordered two springs from Zahal (Israeli Tactical Gear). One for the M4 and one for the Hellcat. I need to stop reading about new gear ?
  17. I have taken mine apart many times to 1) gradually take off material to get an easier load pressure, 2) change to a larger release button, and 3) open up the loading port for faster loading. I have done many mods to my gun because I use it for 3-gun competition. Therefore, it gets fired a lot and the mods have held up.
  18. We are all happy to learn from your mistakes.? Actually, I had the same thing happen years ago. I suspect that the spring was installed on a slant and/or too close to the pivot pin. When I had done mine, I did not know where to put to spring on reassembly. I looked it up after that.
  19. My M4 has the lightest recoil of any 12 ga. that I have ever tried. How much lighter can it get? If one of you gets one, please let us know how it goes. I might look into getting the one for the Hellcat, that little gun has some recoil.
  20. There are QD cups that can be mounted on a hollow stock. Just need to drill a hole in the stock and screw it together. Noveske Flush Mount Push-Button Quick Detach Universal Sling Mount for Polymer Stocks. I mounted one on my SCAR 16 and it holds like it was made there.
  21. Mesa Tactical Urbino Stock Pocket Push Button Sling Adapter with Quick Detach Swivel Benelli M4 Steel Black. Midway has it for $30.
  22. Do not use locktite!!! The stock is screwed into the recoil spring retaining plug. If you lock these two parts together, you will never get them apart. Any future attempt to remove the stock will only back out the retaining plug; leaving it inside of your stock.
  23. I've said this on other posts; the catch is designed to bend where the indents have been cut. By simply widening the indents, the spring weight is lowered and the shells feed easier. In the photo below, you can see how much I remove. You don't want to cut any deeper, just wider.
×
×
  • Create New...