Jump to content

Benelli choke tube tool modification....


M2_shootr

Recommended Posts

I did this about five years ago. Wanted a choke tool to more easily remove and install chokes. While there are some nice ones available, $20-30 is nuts for a uni-task tool

 

-Take your Benelli factory choke tool and drive the cross pin out.

-Drill the hole put to 7/32”

-Chamfer the edges to remove any burrs

-Use a #1 Phillips screw driver or a USGI steel cleaning rod section as a new handle

 

Ee54Fdi.jpg

Link to comment
Share on other sites

I got one of my chokes stuck pretty good on my M4. I ruined a Briley choke tube wrench and buggered up the choke tube. I used the stock Benelli choke wrench and tapped the "arms" with a hammer to break it loose. It worked but I bent the arms on my Benelli wrench. This mod seems like a good idea. And it will help it fit in the choke tube box better.

 

Mike

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...