Jump to content

California Compliant M4 C-Stock


Rasyad

Recommended Posts

I am building a custom stock out of Raven ATI parts and no longer need the factory telescoping stock. I replaced the OEM spring button and fabricated an adjustable fixed length button with internal set screw to lock the length in the standard positions. Hex key will be included. As well I fabricated a custom delrin cheek rest. The stock rest is also included.

 

How about $SOLD with free shipping USPS priority domestic?

 

Thanks,

 

Rasyad

IMG_2925.jpg

IMG_3412.jpg

Edited by Rasyad
SOLD
Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...
I am building a custom stock out of Raven ATI parts and no longer need the factory telescoping stock. I replaced the OEM spring button and fabricated an adjustable fixed length button with internal set screw to lock the length in the standard positions. Hex key will be included. As well I fabricated a custom delrin cheek rest. The stock rest is also included.

 

How about $SOLD with free shipping USPS priority domestic?

 

Thanks,

 

Rasyad

[ATTACH=CONFIG]3689[/ATTACH]

[ATTACH=CONFIG]3690[/ATTACH]

 

Rasyad,

 

Can you please share details about your fabricated fixed length button and how it operates exactly. I just bought a C-stock for use in California and am looking at the different options for fixing the length in position.

 

Thanks.

Link to comment
Share on other sites

Drilled and taped a hole a 6-32 hole in the stock release button (This is one hard piece of steel).

 

Reassembled the stock release button and spring positioned the stock to the length I wanted

 

I cut an old drill bit approx 1/2" in length and dropped it in the hole.

 

Installed a 6-32 x 3/8" set screw and tightened it down.

https://i.imgur.com/hywtIg0.jpg

https://i.imgur.com/xLg8axc.jpg

 

 

 

 

 

Link to comment
Share on other sites

  • 3 weeks later...
Drilled and taped a hole a 6-32 hole in the stock release button (This is one hard piece of steel).

 

Reassembled the stock release button and spring positioned the stock to the length I wanted

 

I cut an old drill bit approx 1/2" in length and dropped it in the hole.

 

Installed a 6-32 x 3/8" set screw and tightened it down.

https://i.imgur.com/hywtIg0.jpg

https://i.imgur.com/xLg8axc.jpg

 

 

 

 

 

 

Thanks for the reply!

 

Was disassembly of the stock release button required or did you drill it in place?

 

If disassembly required, was it pretty straight forward to remove the button? Any tips?

Link to comment
Share on other sites

I imagine he removed the button. It's fairly easy to remove the button. Unscrew the three screws holding the cheek rest in place. Then drive the pin out that is aligned fore and aft while pressing on the button slightly.

 

Yes button was removed, you'll never drill it in place the steel is to hard.

 

Easy to remove and reinstall.

 

Thanks for quick replies. I appreciate the help.

 

Just got the collapsible stock in. Now to work on the modification.

Link to comment
Share on other sites

  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...