Search the Community
Showing results for tags 'case'.
I received my brand new Super Vinci yesterday and had a quesiton and a concern. Just to be clear, it is brand new, unfired, and was factory-sealed when I received it. I'll start with the concern 1) The feed ramp as can be seen in the picture is not centered. In fact, it is so off-center that it is literally rubbing against the inside of the "chamber". [ATTACH=CONFIG]2127[/ATTACH] In the photo above, you can see that it is off center, but because of the shadows, you can't quite see that it is actually rubbing against the inside. Here's a photo showing where it is rubbing (just above my thumb): I hope I'm not being too picky here, but it seems like Quality Control should have seen this, right? Now for my question, and it relates to the case. The only way that the barrel assembly fits into the case is by placing the open area over the "pegs". But, since there is a spring assembly inside of the open area, it would be banging against the pegs. To me, that meas a pretty short life for the spring assembly! Am I missing something? Here's a photo of the open area that would be placed over the pegs (also shown)[ATTACH=CONFIG]2129[/ATTACH]