Jump to content

M2 question


mark29860

Recommended Posts

I have a new M2 trying to change the shims. When I got the stock off it had one shim marked DX. The lady from Benelli told me to take it off put the shim marked C on and then the shim marked DX, my question is those shims have ears on them and when you put them together the ears touch and you have a gap is that correct. Any info will be appreciated. Thanks

Link to comment
Share on other sites

If I'm reading my manual correctly (I expect the setup is similar), the DX spacer goes between the stock and the receiver; the C plate goes at the end of the stock to align the stock with the respective DX spacer installed between the stock & receiver. Don't know if this is accurate for your M2 - don't think any gap is good as the plastic shims will probably crack under recoil.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...