Georgio2125 Posted February 28, 2009 Share Posted February 28, 2009 hello all, i posted on the general forum but figured i should here also. I patterned my supernova today with 3.5" high velocity remingtons with a jellyhead choke. on all 10 shots, the my most dense area was about 3-5 inches left and a few inches down. i tried some with the jellyhead and some with the factory full choke. i evern tried a 2.75" inch load and a 3" load, same result. i had some else shoot and they were also in the same area. up and down i can live with but it was 3-5 inches left every single time. what should i try? i tired 5 shot and 6 shot no change. should i get a rear sight? should i try 4 shot? im stuck, thanks for the help Quote Link to comment Share on other sites More sharing options...
Novaking Posted March 1, 2009 Share Posted March 1, 2009 hello all, i posted on the general forum but figured i should here also. I patterned my supernova today with 3.5" high velocity remingtons with a jellyhead choke. on all 10 shots, the my most dense area was about 3-5 inches left and a few inches down. i tried some with the jellyhead and some with the factory full choke. i evern tried a 2.75" inch load and a 3" load, same result. i had some else shoot and they were also in the same area. up and down i can live with but it was 3-5 inches left every single time. what should i try? i tired 5 shot and 6 shot no change. should i get a rear sight? should i try 4 shot? im stuck, thanks for the help change your shim Quote Link to comment Share on other sites More sharing options...
Georgio2125 Posted March 1, 2009 Author Share Posted March 1, 2009 hey novaking, i just checked to see what the gun came with, its B shim set for right handed (which I am) i guess changing the shim would move it up but as far as making it shoot more to the right (5 inches) would it change? Quote Link to comment Share on other sites More sharing options...
CH/QuakerBoyProstaff Posted March 1, 2009 Share Posted March 1, 2009 Adjustable fiberoptic sights are available for very affordable prices, and will help you out. It will also make your gun a dedicated "turkey specialist" for the task at hand. The sights can be easily removed when it's time to go wingshooting, if and when that is what you want to do. Check out TruGLO's line at www.truglo.com Quote Link to comment Share on other sites More sharing options...
Georgio2125 Posted March 1, 2009 Author Share Posted March 1, 2009 hey thanks for the tip. anyone have a recommendation for best sight with a vent rib camo finish...magnetic? snap on? etc Quote Link to comment Share on other sites More sharing options...
CH/QuakerBoyProstaff Posted March 1, 2009 Share Posted March 1, 2009 This sight combo can be found for $20-$30 iff you look around at Bass Pro, Cabelas, or The Mart The rear sight clamps down by way of four screws that don't come in contact with the finish. This is easily taken off, and put back on. I choose the plain front sight, instead of the big hooded one. Just my .02 http://www.truglosights.com/content/products/firearm/turkey/tru_bead_turkey.asp Quote Link to comment Share on other sites More sharing options...
Georgio2125 Posted March 1, 2009 Author Share Posted March 1, 2009 hey thanks again, what sight combo is that exactly? Quote Link to comment Share on other sites More sharing options...
CH/QuakerBoyProstaff Posted March 2, 2009 Share Posted March 2, 2009 TG950X is the number for the one I prefer. I'll pm you some additional info Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.