Kastnblast Posted August 4, 2009 Share Posted August 4, 2009 Hello, I shoot a 20 ga. Montefeltro, (bought new, used 4 seasons, upland, rarely in rain)usually using non-premium (Estate) high-base No. 6 loads. Last season, my 3rd round wouldn't chamber, and sometimes my 2nd wouldn't either. I've field-stripped and oiled where I thought I should several times. Does this mean my mag spring needs replacing? And, is this best left to a 'smith because I read the thread about being careful, padded vise, headspacing, etc.... Thanks again. Quote Link to comment Share on other sites More sharing options...
agm65ccip Posted August 4, 2009 Share Posted August 4, 2009 Hello, I shoot a 20 ga. Montefeltro, (bought new, used 4 seasons, upland, rarely in rain)usually using non-premium (Estate) high-base No. 6 loads. Last season, my 3rd round wouldn't chamber, and sometimes my 2nd wouldn't either. I've field-stripped and oiled where I thought I should several times. Does this mean my mag spring needs replacing? And, is this best left to a 'smith because I read the thread about being careful, padded vise, headspacing, etc.... Thanks again. Hi welcome to the forum. What do you mean by not chambering exactly? Does the shell not come out of the magazine tube or is it getting stuck on the shell carrier or something else? Quote Link to comment Share on other sites More sharing options...
Kastnblast Posted August 4, 2009 Author Share Posted August 4, 2009 Thanks, sorry--the shell hangs up down on the carrier--and isn't brought up into the chamber. Quote Link to comment Share on other sites More sharing options...
agm65ccip Posted August 4, 2009 Share Posted August 4, 2009 Have you tried cycling shells/snap caps through manually to see if you can spot the hangup? I would be really surprised if the magazine spring was the issue but you could make sure that the follower slides easily in the mag to cover all the bases. Quote Link to comment Share on other sites More sharing options...
Trapshooter1 Posted August 4, 2009 Share Posted August 4, 2009 I have a similar problem shooting trap with my M2. When I load a shell into the chamber, I have to be sure and leave it in the chamber, and not resting at the bottom of the receiver. If I do, the shell will hang up. I do not have this problem with doubles or multiple rounds. Quote Link to comment Share on other sites More sharing options...
Kastnblast Posted August 5, 2009 Author Share Posted August 5, 2009 No, haven't 20 ga. snap caps. But I'll go down to my neighbor's, who has a reloader, and make up some dummy shells and try that. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.