ppro Posted August 15, 2009 Share Posted August 15, 2009 How do you removed the full length magazine tube, from the M-1 Super 90 entry model (older H&K but same model) ...it looks like it is threaded on to a short portion of tube near the receiver. I need to change out the mag tube spring, but am not sure just how to go about it's removal. Pointers would be helpful. thanks Paul Quote Link to comment Share on other sites More sharing options...
Trapshooter1 Posted August 15, 2009 Share Posted August 15, 2009 How do you removed the full length magazine tube, from the M-1 Super 90 entry model (older H&K but same model) ...it looks like it is threaded on to a short portion of tube near the receiver. I need to change out the mag tube spring, but am not sure just how to go about it's removal. Pointers would be helpful. thanks Paul I believe the mag tube is held on by lock tight. You need to heat it with a heat gun and use a strap wrench if needed to remove it. Quote Link to comment Share on other sites More sharing options...
Hookster Posted August 15, 2009 Share Posted August 15, 2009 (edited) This thread has Kip's instructions which seem to be the most detailed I've seen: http://www.benelliusa.com/forum/showthread.php?t=17726 Hookster Edited August 28, 2009 by Hookster replaced incorrect link Quote Link to comment Share on other sites More sharing options...
JoeD Posted August 28, 2009 Share Posted August 28, 2009 I've never removed mine but he manual shows it as threaded into the receiver. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.