MattL Posted February 11, 2006 Share Posted February 11, 2006 Just wondering if anyone has had good / bad experiences with powered optics on thre SBE II / Steady Grip. I checked out a Nikon Monarch Variable Dot and it didn't make the grade (optically...diffraction rings...low brightness on the 1, 4 MOA dot settings) so I'm sending her back...Picking up a Nikon Monarch turkey scope (1.5 - 4.5x) instead.... In the meantime, having Gander powder coat an Advantage Timer pattern on a #93 Weaver base rail to match the gun... FYI; the scope is coming in as Realtree Hardwood...curious if anyone has seen the match with an Advantage Timber SBE II? Anyone bonked their foreheads with a scope?...scope eye relief is ~3.7 inches so it seems like I should get a safe distance on the mount... Quote Link to comment Share on other sites More sharing options...
Butch-M Posted February 11, 2006 Share Posted February 11, 2006 Best bet is to get a scope build for shotguns ... parallax set at 50 yards rather than 100. I bought a Zeiss 3-9x for my SBEII and it has performed flawlessly on my rifled barrel for deer. No bonking or doinking. Quote Link to comment Share on other sites More sharing options...
MattL Posted February 11, 2006 Author Share Posted February 11, 2006 do you recall the spec for eye relief on the Zeiss 3-9X...(...a very nice piece of glass by the way...)? The Nikon shotgun scope I have on order is corrected for 50 yds, so that's good to hear... Quote Link to comment Share on other sites More sharing options...
Bug Posted February 11, 2006 Share Posted February 11, 2006 I have a SBE I with the Steady Grip and installed a Gilmore/Leapold red dot. I had problems mounting the Weaver 93 base with the supplied mounting screws. The screws were too short and only had about one thread engagement, the fromt screw would not even start. I got some longer screws from a gunsmith, had to grind them down some and now work fine. Just a heads up, hope you don't have this problem on the SBE II. How much did Gander charge to coat the base? Thanks, Bug [ 02-11-2006, 01:38 PM: Message edited by: Bug ] Quote Link to comment Share on other sites More sharing options...
MattL Posted February 11, 2006 Author Share Posted February 11, 2006 $20 (on top of the charge for the base...a high $9.00)...speak to the gunsmith at the Middletown, NY store (goes by JT)....they cover the gamut with patterns, but the lead time is long...quoted ~7 wks...so my plan is to install a regular base, add the scope and get busy patterning...replace with the camo base and re-sight when it comes in... Quote Link to comment Share on other sites More sharing options...
Butch-M Posted February 12, 2006 Share Posted February 12, 2006 Zeiss eye relief is 4 inches. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.