W. Posted June 11, 2005 Share Posted June 11, 2005 Can you just remove the casting shim so the stock is in straight line with the barrel? Is there any effect on the function of the gun? Quote Link to comment Share on other sites More sharing options...
tucker301 Posted June 11, 2005 Share Posted June 11, 2005 The casting isn't set by the shims. The shims merely set the drop. The cast on or off is set by the use of the RH or LH locking plate. [ 06-11-2005, 06:08 PM: Message edited by: tucker301 ] Quote Link to comment Share on other sites More sharing options...
Coloradoryan Posted June 13, 2005 Share Posted June 13, 2005 W. No, if your gun is equiped with the cast shim like the super sport you must have the front cast shim in place with the front drop shim ( should be two up front) in a matched position with the rear plate. By removing the front cast shim it will not allow the stock to be seated properly and could end up damaging the stock and it will CERTAINLY effect accuracy and consistancy in shot placement. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.