machurtado Posted January 21, 2010 Share Posted January 21, 2010 I'm looking at getting a SBE II but I have a few questions before I pull the trigger. While talking to the gunsmith that works at the store I was planning on buying it at he told me that I would have to break the shotgun in with at least 200 3 1/2 in rds before it would cycle light loads properly. The second questions was if there is a way to put a limb saver pad on the gun. I have just recently had shoulder surgery and any extra comfort there would help. Thanks Quote Link to comment Share on other sites More sharing options...
tucker301 Posted January 21, 2010 Share Posted January 21, 2010 Limbsaver makes a pad specifically for the SBEII. The gun should be broken in, but I don't think it will take 200 rounds of 3.5" to do it. More like two or three boxes of heavy field loads. Stay within the recommended load guidelines and you'll have no trouble at all. Quote Link to comment Share on other sites More sharing options...
Robertnla Posted January 22, 2010 Share Posted January 22, 2010 Buy the gun you want regret it. Get you a box of clays and a cheap case of 1-1/8 once low brass and have some fun. It will do a good job. You may get 1 or 2 hangs but it will get better quickly. Quote Link to comment Share on other sites More sharing options...
hognutz Posted January 23, 2010 Share Posted January 23, 2010 Limbsaver makes a pad specifically for the SBEII. The gun should be broken in, but I don't think it will take 200 rounds of 3.5" to do it. More like two or three boxes of heavy field loads. Stay within the recommended load guidelines and you'll have no trouble at all. All of the above. Plus make sure you keep it clean and oiled. Especially the bolt rails. You don't need to go nuts. a light coating of good oil is all that is needed. Good luck... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.