RMW59 Posted October 18, 2010 Share Posted October 18, 2010 I have a Benelli M4 with a Tac-Star Side saddle. When I had the side saddle installed I did not receive the take down pin back. I would like to run the gun without the side saddle and need a take down pin to do so. Let me know if any of you have a take down pin that you would be willing to part with. Thanks, Rob Quote Link to comment Share on other sites More sharing options...
tucker301 Posted October 18, 2010 Share Posted October 18, 2010 Brownell's has them. They are called "axle bushing". http://www.brownells.com/.aspx/pid=23683/Product/AXLE_BUSHING Quote Link to comment Share on other sites More sharing options...
Sukhoi_fan Posted October 19, 2010 Share Posted October 19, 2010 (edited) Besides the 'axle bushing' aka pin, you're likely to also need a new retaining spring, a new retaining spacer, and a new retaining ring. And then you're going to need a pair of inside split ring pliers small enough to get that retaining ring into it's groove. Then once you've got it all assembled you're likely going to have to take it all apart again and tweak the retaining spring so it will allow the the axle bushing (pin) to pass through and engage it. Edited October 19, 2010 by Sukhoi_fan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.