pwraudio1 Posted December 15, 2010 Share Posted December 15, 2010 Can you take a pic of your oem stock next to the Mesa stock for us? I'm in the fence on it or the C-stock. Thanks for your time. Lee Quote Link to comment Share on other sites More sharing options...
babob Posted December 15, 2010 Author Share Posted December 15, 2010 is the pad attached securely, there was another report of it wobbling? There is a very small movement of the pad. Nothing that would affect your aim or anything like that. The pad clicks in via two tab. One on top and one on the bottom. The notches in the stock where the tabs go are a little bit larger than the tabs on the pad, so there is just a small amount of play. Quote Link to comment Share on other sites More sharing options...
babob Posted December 15, 2010 Author Share Posted December 15, 2010 (edited) Can you take a pic of your oem stock next to the Mesa stock for us? I'm in the fence on it or the C-stock. Thanks for your time. Lee Will do as soon as I can later tonight. I'll put it in this post. Edited December 15, 2010 by babob Quote Link to comment Share on other sites More sharing options...
babob Posted December 16, 2010 Author Share Posted December 16, 2010 Couple more... Quote Link to comment Share on other sites More sharing options...
KB Fab Posted December 16, 2010 Share Posted December 16, 2010 Those are great, thanks for taking the time to post them. If you could, and are willing, take a pic of the area where the trigger guard meets the stock (while it's installed). Quote Link to comment Share on other sites More sharing options...
texas skeeter Posted December 16, 2010 Share Posted December 16, 2010 Hey look that Urbino over-slobbered on stock for midgets FINALLY came out!! oh and look the "BETTER" Benelli OEM C-stocks are out as well!! Quote Link to comment Share on other sites More sharing options...
saym14 Posted December 16, 2010 Share Posted December 16, 2010 Hey look that Urbino over-slobbered on stock for midgets FINALLY came out!! oh and look the "BETTER" Benelli OEM C-stocks are out as well!! nice but its an evil feature (illegal) in my State. BaBob - it looks like the butt pad is animprovment over stock? maybe its not worth waiting and paying $25 for the limb saver ? Quote Link to comment Share on other sites More sharing options...
Hogslayer Posted December 16, 2010 Share Posted December 16, 2010 Hey look that Urbino over-slobbered on stock for midgets FINALLY came out!! oh and look the "BETTER" Benelli OEM C-stocks are out as well!! Where can one secure one of these OEM C-stocks and how many children do I have to sell to afford it? Quote Link to comment Share on other sites More sharing options...
Hookster Posted December 16, 2010 Share Posted December 16, 2010 Where can one secure one of these OEM C-stocks and how many children do I have to sell to afford it? HK2000 can probably help you out http://www.benelliusa.com/forum/showthread.php?t=24512 Quote Link to comment Share on other sites More sharing options...
Hookster Posted December 16, 2010 Share Posted December 16, 2010 Hey look that Urbino over-slobbered on stock for midgets We prefer to be called "little people"...... Quote Link to comment Share on other sites More sharing options...
KB Fab Posted December 16, 2010 Share Posted December 16, 2010 Well, I just cancelled my order for the Urbino. I'm sticking with my C-stock. Quote Link to comment Share on other sites More sharing options...
KB Fab Posted December 16, 2010 Share Posted December 16, 2010 Hey look that Urbino over-slobbered on stock for midgets FINALLY came out!! oh and look the "BETTER" Benelli OEM C-stocks are out as well!! Well, Mitch musta hurt his mangina on the one that they have because he doesn't like the little pointy cheek piece. Quote Link to comment Share on other sites More sharing options...
kvincent Posted December 16, 2010 Share Posted December 16, 2010 Tough crowd. Just a week ago, Mitch was everyone's hero. Lighten up fellows. We're not playing with Legos here, this is taking on a major financial risk to solve a very specific problem in a very limited market. How's that stock you're working on coming along? Oh yeah, you're not. Kerry PS My order stands. Quote Link to comment Share on other sites More sharing options...
texas skeeter Posted December 16, 2010 Share Posted December 16, 2010 nice but its an evil feature (illegal) in my State. well then maybe you should move back to the U.S.A.!! Quote Link to comment Share on other sites More sharing options...
texas skeeter Posted December 16, 2010 Share Posted December 16, 2010 Tough crowd. Just a week ago, Mitch was everyone's hero. Lighten up fellows. We're not playing with Legos here, this is taking on a major financial risk to solve a very specific problem in a very limited market. WOW!! I think you need to lighten up here Francis!! I was just throwing a jab at a few fellow Midget/short arm having members here and they understood it was in jest!! oh and a shout out to ya HOOKY!! Quote Link to comment Share on other sites More sharing options...
kvincent Posted December 16, 2010 Share Posted December 16, 2010 Skeeter, Maybe you're right and I need to lighten up, I hope so, but it seems like people are being a little rough on Mitch right now and I interpreted your post as one of them. If I read it wrong, I apologize. But if anyone is expecting Mesa Tactical to have the resources to make a stock that fits as well as Benelli International, they're dreaming. I want/need that stock (even if it has slight wings or is a little tight around the trigger group) and I applaud Mesa Tactical for attempting it. It's so easy to tear things down. We should all support their effort or no one will ever make that effort again. I gather that you want it , too, Skeeter, so I bet we are actually on the same page. For those that haven't thought about it, making M4S90 accessories isn't like making 870 accessories. There are orders of magnitude more 870s out there that M4s. We should support anyone that makes products for our babies. Kerry Quote Link to comment Share on other sites More sharing options...
texas skeeter Posted December 16, 2010 Share Posted December 16, 2010 No worries big K!! i think that urbino stock is an excellent choice for people who are looking for a shorter lop and/or cannot own a c-stock. i just personally shoot with the oem c-stock stock just fine and really like the way it functions. but i do wish Good Luck to all the "shortys" that buy the Urbino..... Quote Link to comment Share on other sites More sharing options...
Super Dak© Posted December 16, 2010 Share Posted December 16, 2010 No worries big K!! i think that urbino stock is an excellent choice for people who are looking for a shorter lop and/or cannot own a c-stock. i just personally shoot with the oem c-stock stock just fine and really like the way it functions. but i do wish Good Luck to all the "shortys" that buy the Urbino..... Stop being a bully Skeeter, just 'cus some of us are big enough to not need a C stock 'Course most of my guns are under 25" any ways, and I'm 6'4" so go figure Quote Link to comment Share on other sites More sharing options...
texas skeeter Posted December 16, 2010 Share Posted December 16, 2010 Stop being a bully Skeeter its called "Sarcasm" SuperDuk!! Quote Link to comment Share on other sites More sharing options...
saym14 Posted December 16, 2010 Share Posted December 16, 2010 well then maybe you should move back to the U.S.A.!! considered it - but right now there is more to my life than a c-stock. Quote Link to comment Share on other sites More sharing options...
texas skeeter Posted December 16, 2010 Share Posted December 16, 2010 considered it - but right now there is more to my life than a c-stock. Yeah but there's no good reason not to live in the "BEST" country or states in the world!! Quote Link to comment Share on other sites More sharing options...
saym14 Posted December 16, 2010 Share Posted December 16, 2010 Yeah but there's no good reason not to live in the "BEST" country or states in the world!! will all of Kommiefornicas woes I still have it pretty good here. so How about a range report on the Urbino someone ? Quote Link to comment Share on other sites More sharing options...
chuck_s Posted December 20, 2010 Share Posted December 20, 2010 No range report, but it took me about 10 minutes to fit the Urbino (90030) stock to my M4 minutes ago. Exactly one (1) week delivery from CA to OH. Stock is like night and day different from the factory stock, it's really hard to imagine how much difference a proper length stock makes. Earlier messages here noted it was hard to get the trigger group back with the stock mounted. Since this stock does not unscrew I (like several) replaced the trigger group first and then fitted the stock. Dirt simple. -- Chuck Quote Link to comment Share on other sites More sharing options...
Austinwolv Posted December 21, 2010 Share Posted December 21, 2010 No range report, but it took me about 10 minutes to fit the Urbino (90030) stock to my M4 minutes ago. Exactly one (1) week delivery from CA to OH. Stock is like night and day different from the factory stock, it's really hard to imagine how much difference a proper length stock makes. Earlier messages here noted it was hard to get the trigger group back with the stock mounted. Since this stock does not unscrew I (like several) replaced the trigger group first and then fitted the stock. Dirt simple. -- Chuck Exactly the same case here. That might as well have been what I would have posted word for word. Quote Link to comment Share on other sites More sharing options...
saym14 Posted December 21, 2010 Share Posted December 21, 2010 Exactly the same case here. That might as well have been what I would have posted word for word. how about - with the stock on - if you remove the trigger group to clean it. will the trigger group go right back on ? or do you then have to remove the stock to get it back on ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.