Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Benelli Forums
cardopski

Newbie water fowler needing some advice/knowledge...

Recommended Posts

Hi,

Just purchased a Monte 20G short stock 24" (I'm a smaller stature shooter) and will be going duck hunting for the first time. Wanted to know if anyone can help me out with the following:

 

1. What size hevishot duck load should I use? I've been reading #4.

2. If I use hevishot, should I purchase an aftermarket choke? I've seen both Full and IC at Cabelas. Which one?

 

Any other gear tips are greatly appreciated. Thanks in advance!

C

Share this post


Link to post
Share on other sites

Being a 20GA, I would at least go with a #2 shot or BB and go with the IC or Mod choke. I would not shoot steel with the full choke. Read your manual for advice chart. What is the longest you can put in a Monte 20GA? 3.5" is the longest for 12GA.

 

This is simply my opinion as others may tune in. I am not so familiar with the 20GA.

Share this post


Link to post
Share on other sites
What is the longest you can put in a Monte 20GA? 3.5" is the longest for 12GA.

 

3" is the longest I can put. Thanks for your input.

Share this post


Link to post
Share on other sites
Do you/have you used hevi shot in your monte? Do you use the provided chokes? Or after market?

 

I have only used Black Cloud and you should be fine with the provided Crio chokes. With the short barrel, you may however want to look at the extended chokes by Carlson or Patternmaster to extend the range distance of your shots. You should also always buy the 3".

Edited by jonesbb630

Share this post


Link to post
Share on other sites

You should be just fine with the 1250fps 1-1/4oz #4 Heavy Shot Duck or Heavy Metal 1oz. Be prepared cause it ain't cheap.

 

Personally, in my 20ga Monte I shoot 7/8 oz 3" Winchester Xpert or Federal speed shok steel in #4 for decoying ducks with the factoty IC choke and have no problem stoning the ducks. If their ranging a bit wider 30-35yds, I'll switch to #2's and my modified tube, but I don't take shots much further than that.

Share this post


Link to post
Share on other sites

Hevi-Shot and Hevi-Metal should work fine with the factory chokes Ic. or Mod will do, but I would still pattern your gun no mader who's sell you pick to make sure.

 

Hevi-Metal #3 or #2

Hevi-Shot #2 or #4

Edited by DDragon

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...