Fastlane Posted February 17, 2012 Share Posted February 17, 2012 (edited) I already have a light with VLTOR picatinny mount and looking for the simplest way to solidly mount it to the Super Nova Tactical. Will this Streamlight 69906 mount for the 870 fit the mag tube on a Super Nova? : http://shop.gunsfishing.com/Streamlight-Tlr-Rem-870-Mag-Tube-Rail-P17264.aspx Even if it takes some customizing to fit the groove around the barrel lug, is the diameter of the hole the same on an 870? I also saw the BLAM4 for the M4, but don't really need the sling mount. Will it fit a Super Nova? http://www.brownells.com/.aspx/pid=44716/avs|Manufacturer_1=CORPS TECHNOLOGY GROUP/Product/BENELLI-M4-BLAM-4-LIGHT-MOUNT Edited February 17, 2012 by Fastlane Quote Link to comment Share on other sites More sharing options...
Hookster Posted February 17, 2012 Share Posted February 17, 2012 Hey Fastlane, I'm guessing if the Blam4 was a no mod needed fit on the SNT they's advertise it as working on more than just the M4 but here is the direct email for the manufacturer (Forum member BLAM4) [email protected] He might be able to give you an idea how much modification would be needed to make it work. BTW Pics when it's all done!!!... Quote Link to comment Share on other sites More sharing options...
Fastlane Posted February 17, 2012 Author Share Posted February 17, 2012 (edited) Hey Fastlane, I'm guessing if the Blam4 was a no mod needed fit on the SNT they's advertise it as working on more than just the M4 but here is the direct email for the manufacturer (Forum member BLAM4) [email protected] He might be able to give you an idea how much modification would be needed to make it work. BTW Pics when it's all done!!!... Thanks, I did send them an email after posting this thread. The first choice is the Streamlight rail or something like it, because it doesn't have the slot for the sling. I prefer the sling to hang down from the bottom using the existing holes and QR sling swivels. There is also the Streamlight 69903, which clamps over the tube instead of being held in place by the end cap or extension like the 69906, but don't know if it fits the SNT tube either. http://www.streamlight.com/documents/brochures/TLRAccessoriesChart.pdf 69906 shown, 69903 is like the 69901 pictured, but with 3 clamp bolts instead of just 2. Edited February 17, 2012 by Fastlane Quote Link to comment Share on other sites More sharing options...
Liet Posted February 17, 2012 Share Posted February 17, 2012 I have the 870 mount and no it wont fit, but if you do a little grinding you could probably make it fit. Quote Link to comment Share on other sites More sharing options...
Fastlane Posted February 17, 2012 Author Share Posted February 17, 2012 I have the 870 mount and no it wont fit, but if you do a little grinding you could probably make it fit. If the grinding is on the edge of the ring on the barrel side, no problem, as long as it fits well over the mag tube. Thanks for the reply. Quote Link to comment Share on other sites More sharing options...
Liet Posted February 18, 2012 Share Posted February 18, 2012 Barrel side. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.