ROCKETW19 Posted September 22, 2012 Share Posted September 22, 2012 I know guys I am sorry for non Benelli question but honestly I get good anwsers here so i have to ask. I have read both ways some say good some say does very very lil. anyone shot a ported gun not a comp just a ported one. I post picture of exact gun I am getting built. I will take any therorys also just please tell me its not real just your thoughts Quote Link to comment Share on other sites More sharing options...
crofton Posted September 22, 2012 Share Posted September 22, 2012 Would surf on over to glocktalk and there are thousands ready to reply. http://www.glocktalk.com/ Quote Link to comment Share on other sites More sharing options...
ROCKETW19 Posted September 22, 2012 Author Share Posted September 22, 2012 thanks I will but usaually dont wanna jump in a fourm with a question like that I will get flamed for sure. I know you guys just get me for bad spelling and not my questions,lol Quote Link to comment Share on other sites More sharing options...
ROCKETW19 Posted September 22, 2012 Author Share Posted September 22, 2012 lol my ip is banned over there. funny never heard of that fourm untill today! Quote Link to comment Share on other sites More sharing options...
crofton Posted September 22, 2012 Share Posted September 22, 2012 Are you able to see the following thread? http://www.glocktalk.com/forums/showthread.php?t=1444247 Quote Link to comment Share on other sites More sharing options...
Creeper Posted September 22, 2012 Share Posted September 22, 2012 Work up a load with a (preferably light) bullet you like... using more of a slower burning powder. You want enough to effectively "operate" the ports, but no more. It's a bit of a balancing act to work up a load, but if your search-foo is good, you'll find all sorts of articles and load data on the interwebnet. C Quote Link to comment Share on other sites More sharing options...
alexcapone Posted September 22, 2012 Share Posted September 22, 2012 Porting a gun will reduce recoil and prevent muzzle rise which ultimatley leads to more accuracy with your firearm. It accomplishes this by releasing gasses emitted through the ports. I have a Glock 35 which has a slide cut out on top. This allows for a ported barrell to be used that does not extend past the slide. The thing you have to be careful of is using low power ammo with ported barrels because your gun will not be able to cycle properly. With a 45 caliber weapon that shouldn't be a problem though. Quote Link to comment Share on other sites More sharing options...
ROCKETW19 Posted September 22, 2012 Author Share Posted September 22, 2012 Are you able to see the following thread? http://www.glocktalk.com/forums/showthread.php?t=1444247 ya i can see it but only 1 post. I did some search on another fourm and came up with that it is not that good on a 45cal. from what I read it said, the bullet is slow enough that most gasses are gone when leaving the barrel and port wont help much in standard 45cal rounds. I will not be loading my own special hot ones so porting seems to not be for me and a 45. they did say it will make cool fire balls at the range though,lol Quote Link to comment Share on other sites More sharing options...
ROCKETW19 Posted September 22, 2012 Author Share Posted September 22, 2012 Porting a gun will reduce recoil and prevent muzzle rise which ultimatley leads to more accuracy with your firearm. It accomplishes this by releasing gasses emitted through the ports. I have a Glock 35 which has a slide cut out on top. This allows for a ported barrell to be used that does not extend past the slide. The thing you have to be careful of is using low power ammo with ported barrels because your gun will not be able to cycle properly. With a 45 caliber weapon that shouldn't be a problem though. G35 is 40 cal correct? do you use standard rounds or make your own? I know zero about the 40cal but I read the 45 is not hot enough to let the ports do their job well. (factory ammo) Quote Link to comment Share on other sites More sharing options...
RDA1 Posted September 22, 2012 Share Posted September 22, 2012 Porting a gun will reduce recoil and prevent muzzle rise which ultimatley leads to more accuracy with your firearm. It accomplishes this by releasing gasses emitted through the ports. I have a Glock 35 which has a slide cut out on top. This allows for a ported barrell to be used that does not extend past the slide. The thing you have to be careful of is using low power ammo with ported barrels because your gun will not be able to cycle properly. With a 45 caliber weapon that shouldn't be a problem though. The 34 and 35 slides aren't cut for porting purposes, they are that way to reduce the weight. I suppose you could use a ported barrel, not really sure why one would, they shoot so well the way they are. Quote Link to comment Share on other sites More sharing options...
Hookster Posted September 22, 2012 Share Posted September 22, 2012 Very cool looking Glock there Rocket!!!.... are you getting the standard Mdl 21 or the 21sf? Quote Link to comment Share on other sites More sharing options...
crofton Posted September 22, 2012 Share Posted September 22, 2012 ya i can see it but only 1 post. I did some search on another fourm and came up with that it is not that good on a 45cal. from what I read it said, the bullet is slow enough that most gasses are gone when leaving the barrel and port wont help much in standard 45cal rounds. l 42 users have read the thread, but zero replies. Keep checking. I believe porting isn't the way to go with .45's. Quote Link to comment Share on other sites More sharing options...
alexcapone Posted September 22, 2012 Share Posted September 22, 2012 (edited) G35 is 40 cal correct? do you use standard rounds or make your own? I know zero about the 40cal but I read the 45 is not hot enough to let the ports do their job well. (factory ammo) Yes the G35 is .40 caliber. I shoot factory 9mm rounds with my ported barrel (it is a conversion barrel) and it shoots great. Honestly, I don't know enough about shooting 45 caliber with a ported barrel because I don't own a 45. I do know that Glock makes a 21C which a factory ported barrel so conceptually it should not be a problem. The 34 and 35 slides aren't cut for porting purposes, they are that way to reduce the weight. I suppose you could use a ported barrel, not really sure why one would, they shoot so well the way they are. Yes you're correct. The cutout was meant to reduce the weight of the gun. But if you can reduce recoil without affecting cycling then I'm all for porting the barrel. Glock even produces them as factory guns: http://en.wikipedia.org/wiki/Glock#9.C3.9719mm_Parabellum "The Glock 17C was introduced in 1996 and incorporated slots cut in the barrel and slide to compensate for muzzle rise and recoil. Many other Glock pistols now come with this option, all with a "C" suffix on the slide." http://remtek.com/arms/glock/model/40/24c/index.htm "As can be seen in the chart, the Glock 24Cs longer barrel provided increased muzzle velocities, ranging anywhere from 25 to 60 feet per second faster. Shooting the 24 and 22 side by side, I noted a big difference in muzzle flip with the Glock 24C. It was quite obvious that, the extra weight and vented barrel system do perform as claimed." Edited September 22, 2012 by alexcapone Quote Link to comment Share on other sites More sharing options...
ROCKETW19 Posted September 23, 2012 Author Share Posted September 23, 2012 Very cool looking Glock there Rocket!!!.... are you getting the standard Mdl 21 or the 21sf? yes reg 21 just like picture execpt no ports in barrel I think Quote Link to comment Share on other sites More sharing options...
ROCKETW19 Posted September 23, 2012 Author Share Posted September 23, 2012 42 users have read the thread, but zero replies. Keep checking. I believe porting isn't the way to go with .45's. I think you are right. Quote Link to comment Share on other sites More sharing options...
KB Fab Posted September 23, 2012 Share Posted September 23, 2012 I believe porting isn't the way to go with .45's. Indeed.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.