Jump to content

Super black Eagle Bolt Disassemble?


c.j.

Recommended Posts

There's a pin at the back of the bolt that holds the firing pin in. Pull that pin out. Remove the firing pin. Protruding from the top in the front part of the bolt is the locking head pin. Turn the bolt upside down and that pin will come out. Now the locking head will come out along with the spring.

Link to comment
Share on other sites

There's a pin at the back of the bolt that holds the firing pin in. Pull that pin out. Remove the firing pin. Protruding from the top in the front part of the bolt is the locking head pin. Turn the bolt upside down and that pin will come out. Now the locking head will come out along with the spring.

 

I did everything up to this part: Now the locking head will come out along with the spring

 

the locking head wont come out?

Link to comment
Share on other sites

If you did everything up to that part, there's nothing else holding the locking head in. The firing pin retaining pin on the left holds the firing pin in, which holds the locking head retaining pin in (short round thing with the hole in the bottom on the right, under the locking head), which holds the locking head and inerta spring in.

 

BenelliBolt_zps1e63ff9a.jpg

Edited by truckcop
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...