Kevinvb11 Posted August 14, 2013 Share Posted August 14, 2013 I'm wondering what folks who have installed a scope on the SBE use to mount it. I've got a Nikon slug hunter on the way and not sure what rail and ring works on the barrel. If I install a low mount does the scope sight clear the iron sights? I also know the barrel is already drilled tapped, but looking online, it seems the are 100s of configurations between rings and plates or rails....just looking for a proven setup if any of you have a sbeii with slug barrel/slug hunter scope. Thanks in advance! kevin Quote Link to comment Share on other sites More sharing options...
electricstart Posted August 15, 2013 Share Posted August 15, 2013 I mounted a Nikon monarch 3-9x42mm on my Sb2 with Warne medium height rings. Weaver 93a base that Benelli recommends. Really like Warne rings .The plugs that benelli uses to cover up the rail mounting screw holes are tough to get out with out scratching gun. I used a pointed object to push the little plugs out. I went from inside of receiver out .I had to screw the back rifle sight all the way down but was able to keep on. Depends on the size of your objective that will decide size of rings low, medium or high.I tried to go as low as possible.But have 42 mm objective. I have not shot yet so i cant tell you if it is perfect. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.