00stormbringer Posted January 8, 2014 Share Posted January 8, 2014 (edited) I like it better then the Mesa Grip QD. It is a better balance point for a sling attachment. The PMM SCAR QD mount does not work with the size of the GG&G loop. Milled 2.5mm the shape of plate face from the polymer pistol grip. Edited January 8, 2014 by 00stormbringer add measurement Quote Link to comment Share on other sites More sharing options...
AVATactical.com Posted January 8, 2014 Share Posted January 8, 2014 They are not out yet, to my knowledge, but IWC is coming out with something similar for the HK Style Loops: http://www.ar15.com/forums/t_6_37/411747_SCAR_QD_Rotation_Limited_Sling_MOUNT_N_SLOT_by_Impact_Weapons_Components_.html How involved was the mod to the c-stock? Is that plate slightly larger/different profile that the rear of the receiver? Quote Link to comment Share on other sites More sharing options...
00stormbringer Posted January 8, 2014 Author Share Posted January 8, 2014 There is a slight difference in length, but not much. Tne Grip is on tight and the mount is solid. [ATTACH=CONFIG]2468[/ATTACH][ATTACH=CONFIG]2469[/ATTACH][ATTACH=CONFIG]2470[/ATTACH][ATTACH=CONFIG]2471[/ATTACH] Quote Link to comment Share on other sites More sharing options...
StrangerDanger Posted January 9, 2014 Share Posted January 9, 2014 Looks good. What method did you use to cut the plastic grip core? Quote Link to comment Share on other sites More sharing options...
Vertigofirearms Posted January 9, 2014 Share Posted January 9, 2014 Not bad, i might try that on a full stock for my M4. Quote Link to comment Share on other sites More sharing options...
00stormbringer Posted January 9, 2014 Author Share Posted January 9, 2014 Looks good. What method did you use to cut the plastic grip core? I sandwiched the core between two sheets of steel in a vise to control depth and used a hand grinder. This Mod finally puts an end to the rolling reciever issue that I was having with the Mesa sling point. Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted January 9, 2014 Share Posted January 9, 2014 Why did the C-stock need to be modified ?? Quote Link to comment Share on other sites More sharing options...
00stormbringer Posted January 9, 2014 Author Share Posted January 9, 2014 Why did the C-stock need to be modified ?? The GG&G single point sling mount is designed to work with the standard pistol grip stock that attaches to the end of the recoil tube and can be adjusted to accommodate the 2.5mm GG&G Plate. The C-Stock pistol grip attaches to the threads at the beginning of the recoil tube and cannot be adjusted. Quote Link to comment Share on other sites More sharing options...
00stormbringer Posted January 9, 2014 Author Share Posted January 9, 2014 http://www.gunpartscorp.com/ad/980390.htmWhen I modified my C-stock, first the MESA (requires drilling) and next for the GG&G (requires milling); I bought a spare grip core for $42 for each job, so that I can always go back to OEM at any time. Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted January 9, 2014 Share Posted January 9, 2014 The GG&G plate will function on the collapsible stock it just has a 2.5 mm gap .....cosmetic, like the Glock gap at the bottom of the magazine well that actually functions to ease magazine removal to manage cartridge malfunctions. The field stock bolt screws into the action recoil spring retainer nut; however, the double ended threaded bolt length of the field can be adjusted to accommodate for the 2.5 mm sling plate thickness; the GG&G tool for the field stock installation is designed to adjust the bolt length 3 mm.....it's a 8 x 1.0 mm pitch bolt.....turned 3 times = 3mm, as per instructions, and now it fits without the same cosmetic gap suffered by the collapsible stock. Quote Link to comment Share on other sites More sharing options...
00stormbringer Posted January 10, 2014 Author Share Posted January 10, 2014 [/QUOTE] It looks loose? Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted January 10, 2014 Share Posted January 10, 2014 (edited) It looks loose? It was !.....I just didn't crank it one more turn for a lazy photo...my bad. I have the GG&G sling, just prefer the modified MESA installed in the roll pin hole, so I had not paid much attention to solving this gap problem. There is plenty of room to insert a polymer plug securely in the rectangular forward grip and have its external profile shaped to the backside of the trigger guard for a nice look. I am going to have to look around for the right material for this project. Will update. Edited January 10, 2014 by benelliwerkes Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted January 11, 2014 Share Posted January 11, 2014 (edited) To assist those in following along as to the mechanics under discussion on this thread, here are some illustrations of the M4 field stock bolt as it is related to the action recoil tube and its spring retaining nut, as well as how compression of the stock bolt provides the extra length to fit the field stock flush with the receiver when a sling plate is installed. Edited January 11, 2014 by benelliwerkes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.