NHnewbie Posted July 14, 2014 Share Posted July 14, 2014 I am experimenting with a Nordic Components +1 magazine extension on a CC 7 rnd mag tube. First test was with the standard CC/Wolff mag spring which came with the CC magazine tube. Had some failures to eject with this setup when using Federal 2 3/4 reduced recoil 00 buck. Full power Remington Express loads cycled OK. The Nordic extension came with a very long spring which must be cut to proper length. I will try that next, but am wondering how much effect the mag spring might have on proper cycling? Quote Link to comment Share on other sites More sharing options...
BLACK Posted July 14, 2014 Share Posted July 14, 2014 failures to eject with reduced recoil 00 buck. how much effect the mag spring have on proper cycling? The mag spring has a lot to do with cycling on an M4. But it has no bearing on ejection. I think the low recoil shells are the suspect. Quote Link to comment Share on other sites More sharing options...
RoadDad Posted July 14, 2014 Share Posted July 14, 2014 The mag spring has a lot to do with cycling on an M4. But it has no bearing on ejection. I think the low recoil shells are the suspect. ... ^this ... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.