Unobtanium Posted November 30, 2017 Share Posted November 30, 2017 ^I'll tend to agree. I sold my Black Carrier Comp CH and just run OEM's. I miss the CC only for the "oohhh...aahhhh..." when I posted photos of it on this forum, lol Quote Link to comment Share on other sites More sharing options...
sniiped Posted December 1, 2017 Share Posted December 1, 2017 (edited) https://www.botach.com/kley-zion-benelli-m4-ergonomic-3x-oversized-charging-handle This is what is currently on my M4. The only complaint I could possibly have with it is I dislike the finish. It gives me that extra something to grab onto for those quick charges. I haven't had it for very long, but it seems legit so far. It's the same design as the OEM, just a larger handle to grab. At some point, I'll probably get it cerakoted and really love it. I find it odd that I haven't found this mentioned on the forum before, but maybe I found an unknown product? If so, there's my mini 100 round review. As far as the one being produced, I think the more simple it is, the better the overall product will be. Just my .02. Edited December 1, 2017 by sniiped fixed the link Quote Link to comment Share on other sites More sharing options...
bcruze Posted December 12, 2017 Share Posted December 12, 2017 I'd be in for one. Quote Link to comment Share on other sites More sharing options...
vabluefish Posted December 30, 2017 Share Posted December 30, 2017 I'd be in for one, pending the final design. My M4 is mainly in stock form, but I always wanted the CC's CH. Quote Link to comment Share on other sites More sharing options...
fastdriver1 Posted January 1, 2018 Share Posted January 1, 2018 I'd be in for one Quote Link to comment Share on other sites More sharing options...
Toaster Posted January 1, 2018 Author Share Posted January 1, 2018 Hello everyone, Been doing research, feeling out different shops. Some seems more cautious about ITAR than others, some want nothing to do with it being a gun part. About to start obscuring the truth and tell them its camping our out-door gear.... morons.... I might go turn one on my buddies lathe/mill and call it a wrap. Been fooling with this TTI handle.. It is truly horrible. In every way.. I just started to notice the galling from the bolt/handle interface on the TTI handle, presumably from the weight/material difference. Funny enough, it is in a circular pattern as the knob rotates.. At least it is fatiguing evenly!!.. SMH... Still on the table,... Quote Link to comment Share on other sites More sharing options...
Jolly Roger Posted January 1, 2018 Share Posted January 1, 2018 Whats wrong with the TTI? I was thinking about trying one out.... Quote Link to comment Share on other sites More sharing options...
Toaster Posted January 2, 2018 Author Share Posted January 2, 2018 Don't Really don't. It spins, it detents less than a stock knob, it weighs by FAR more, it damages the receiver, the knurling is a JOKE, it bends/work hardens against the bolt, it really isn't much larger diameter... Just dont. Look around for something better or kick people like me in the ass to do it right. Quote Link to comment Share on other sites More sharing options...
M2_shootr Posted January 2, 2018 Share Posted January 2, 2018 What is the complaint with the OEM handle? Frankly, every aftermarket one that I have seen with the tube handles on them look retarded. Sorry, they just look stupid, and the bigger diameter the worse they look. What's the point? The size of the OEM handle offers plenty of purchase.All it takes is one sheep to say baaah and the rest of the sheep follow, lol.The OEM handle stays put when you want it to and comes out when you want it to. When I see the amount of ridiculous and unnecessary bling people throw onto their weapons, I'd hate to see what their houses look like, lol! No taste! Thanks for saving me from typing....... Anyone have a plausible answer? Quote Link to comment Share on other sites More sharing options...
Jolly Roger Posted January 2, 2018 Share Posted January 2, 2018 I dont know guys......Im really diggin this one! Quote Link to comment Share on other sites More sharing options...
Unobtanium Posted January 2, 2018 Share Posted January 2, 2018 Thanks for saving me from typing....... Anyone have a plausible answer? The stock CH is a good option, and one I'm happy with... *former Carrier Comp true black finish handle owner. Quote Link to comment Share on other sites More sharing options...
Jolly Roger Posted January 2, 2018 Share Posted January 2, 2018 Ive been reading in forums over the net and the TTI charging handle seems to be hit or miss. StrangerDanger seems to have had good luck with them but others have experienced them bending or just shearing off while shooting or detent/manufacturing problems...sad. I really dont like the original m4 CH at all. Quote Link to comment Share on other sites More sharing options...
Toaster Posted January 2, 2018 Author Share Posted January 2, 2018 You want it,? You can have it for $20, obo, PM me Quote Link to comment Share on other sites More sharing options...
Jolly Roger Posted January 2, 2018 Share Posted January 2, 2018 No, I already had one coming....now Im just depressed You want it,? You can have it for $20, obo, PM me Quote Link to comment Share on other sites More sharing options...
Toaster Posted January 2, 2018 Author Share Posted January 2, 2018 260 vs 180 gn OEM almost 1/4 wall thickness on the handle. Incredibly underengineed Hey man, don't mess up the finish on your receiver. It goes in too far if you lean the gun on it or close it in a snug case.. kinda forcing my hand on the NP3 coating Quote Link to comment Share on other sites More sharing options...
Jolly Roger Posted January 2, 2018 Share Posted January 2, 2018 Thanks Toaster, Ill be careful. I have a FFT C/H and had to Dremell it a bit for a good fit. Its now harder to take out then the OEM one is. I emailed FFT about the poor fit and he was an Ass about it. No more FFT gear for me..... Quote Link to comment Share on other sites More sharing options...
Toaster Posted January 3, 2018 Author Share Posted January 3, 2018 (edited) In case I never get around to it, please notice the tri-lug detent is Check shaped, not a simple U, making it more difficult to accidentally remove.. im guessing the cut was made from the back, or simply not perpendicular. Look at it closely Edited January 3, 2018 by Toaster Quote Link to comment Share on other sites More sharing options...
Jolly Roger Posted January 3, 2018 Share Posted January 3, 2018 Yes Sir, it take awhile messing with these to know what your doing....even then its not an exact science. Quote Link to comment Share on other sites More sharing options...
Jolly Roger Posted January 3, 2018 Share Posted January 3, 2018 The FFT was to long and would scrape the inside of the receiver when inserted. Quote Link to comment Share on other sites More sharing options...
Toaster Posted January 3, 2018 Author Share Posted January 3, 2018 (edited) Removal is simple. Rotate to the hardest spring pressure. And pull out. A lot overlooked on these examples.. Edited January 3, 2018 by Toaster Quote Link to comment Share on other sites More sharing options...
Jolly Roger Posted January 3, 2018 Share Posted January 3, 2018 I dont get it..... Quote Link to comment Share on other sites More sharing options...
Toaster Posted January 3, 2018 Author Share Posted January 3, 2018 Hey Jolly, Thanks again for the help, and illustrations provided. I'll be sure to send you a free production sample or two. If/when I get there. Anyone out there willing to donate information/ideas/CAD work will also get one.. Quote Link to comment Share on other sites More sharing options...
Sornjn Posted December 6, 2020 Share Posted December 6, 2020 Is it still possible to get one or 2? (Cc charging handle) Quote Link to comment Share on other sites More sharing options...
aznwhip Posted December 6, 2020 Share Posted December 6, 2020 3 hours ago, Sornjn said: Is it still possible to get one or 2? (Cc charging handle) No... Quote Link to comment Share on other sites More sharing options...
ClackClackBAM Posted December 6, 2020 Share Posted December 6, 2020 19 hours ago, Sornjn said: Is it still possible to get one or 2? (Cc charging handle) Nope. Believe me, I know. I practically begged Marcy to make one for me and all I got in response was a laugh. lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.