Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Benelli Forums
Sign in to follow this  
trip casson

Ejector replacement

Recommended Posts

You mean the extractor? If so, it goes from the top down. Use a 1/16" punch. It's a half blind pin so be careful pushing it out. Angle the top of the pin rearward like you're pushing forward while hitting the punch. I also leave the bolt fully assembled while doing this, the bolt body and locking head pin act like a vise to hold the locking head still while it's being hit. The act of doing this will bend the punch slightly so use a quality punch like Starrett. The cheap ones may break off in it while it's in there. 

Share this post


Link to post
Share on other sites

Benelligunny is right on all marks. I use a curved 1/16 punch for this task. It’s one of the Brownells punches with the nipple on the tip. These punches are consumable but tend to last a while unless you’re rough on it.

 

Pay attention to where the spring is before you disassemble. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...