Echo Posted October 29, 2005 Share Posted October 29, 2005 Ok I thought it was the extractor but gunsmith thinks everything is up to specs. He looked it over and shot it and everything worked fine of course. Cleaned immaculately, lightly oiled and fired the next day and about every other time would not eject 3" shell from chamber. Again stuck half way out of chamber with second shell trying to come up. Bolt is fully back and not in contact with the empty shell. This is a new problem and did not happen last year at all. Happens primarily with Kent buy also Federal shells. Also noticed that when did cycle and shoot 3 shells the third shell would remain within the case just floating free and I would have to dump it out the ejection port? Thought the 3rd shell should fully eject from the gun? Very frustrated as may have to send back to benelli which means not having my gun for the season. Anybody have any idea why an SBE II would be malfunctioning in this manner? I am prety much clueless. Thanks alot. Quote Link to comment Share on other sites More sharing options...
tucker301 Posted October 29, 2005 Share Posted October 29, 2005 Did you reply to wallhanger54's response on your other post. Trust me - he KNOWS what he's doing. Quote Link to comment Share on other sites More sharing options...
Commando Posted October 29, 2005 Share Posted October 29, 2005 I have been shooting Kents 3 and 3 1/2 loads with no problems. Just remember mounting your weapon properly on the follow through so the Inertia mechanics can work properly on the load/ejection... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.