Jump to content

M4 reassemble issue


Gman415

Recommended Posts

Please help!

I have a new H20 5+1, took it to the range the other day and it would not cycle a third round or eject shells properly. So I took it home and disassembled my shotgun after reading that I may need to lubricate parts. 
I cleaned:

the barrel

the bolt (and lubricated)

the trigger assembly (relatively lightly)

both ARGO tubes

the breech and chamber

now after putting it back together the barrel will stop sliding into place about a 1/2 an inch short. It’s driving me mad and I’ve spent the better part of a day retracing my steps. I’ve noticed the lower part of the beginning of my barrel seems to be making contact with the bolt/nut that attaches my magazine tube to the feeding port. I’ve only been a gun owner for a little over a year now and this is my third, so please excuse any misused terminology. I also live in California if that says anything... lol

8DDCC9AD-BDD7-429B-964F-4D26215C7293.jpeg

173EF0E5-4EF4-48BA-BA4A-5E2C78791A7F.jpeg

E99CA4BB-400C-4AEF-98B8-193051A80286.jpeg

1EA9A67B-1844-49A7-95BA-DB1CA47E7613.jpeg

B8F65E86-2592-426E-9D14-3B5750F19D5F.jpeg

E9C919CA-6A97-4597-9A44-3A2976689744.jpeg

65322C1D-C9F6-4B1E-8C67-080A33EC1E38.jpeg

Link to comment
Share on other sites

I made sure I installed the bolt retaining pin correctly, unlike the other user who posted about reassembly problems. My bolt also locks all the way back and appears to be working normally. After releasing the bolt and cycling it again the guide arm can jump out of the recoil pin location but I just need to fiddle the gun a bit and the bolt will pull back again.

 

If that helps at all...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...