Shanedog Posted July 21, 2020 Share Posted July 21, 2020 Hello I have a brand new M4 which I haven't used until recently. I bought from Gander mountain which now has closed. I put a extended tub and a magazine follower on it. When I fires a round the following shell will not cycle into the barrel or action and gets hung up near the base plate? So I have to manually pull the charging handle and then it cycles and fires. Any suggestions as to why this is occurring? I am using good quality ammo etc. Thank you Quote Link to comment Share on other sites More sharing options...
Croaker Posted July 21, 2020 Share Posted July 21, 2020 I hate to state the obvious...is it lubed? Also, did you fire it before installing the extension, and how did it function? Right now the problem can be blamed on the extension. Quote Link to comment Share on other sites More sharing options...
Shanedog Posted July 21, 2020 Author Share Posted July 21, 2020 Ok It is not lubed and I did not fire it before I put the extension on. I emailed Benelli, I guess I need to locate a service center just have it repaired. Thank you for the response. Quote Link to comment Share on other sites More sharing options...
Evolution Posted July 21, 2020 Share Posted July 21, 2020 Why are you giving up on it so quickly? I would break it down, lube it real well, load it up and manually cycle shells thru it to see if there is any hang up doing that. Even if there is or isn't a hang up manually running shells thru it, I'd then fire it a bunch using full power 00 or slugs. Then see how it runs after/during that exercise. I'd do anything I could to avoid shipping a gun anywhere. Some of them just need a little working-in when new out of the box. Good luck. Quote Link to comment Share on other sites More sharing options...
Shanedog Posted July 21, 2020 Author Share Posted July 21, 2020 Thanks I should give that a go first. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.