Benneli MP95 pistol

[Gunman123 0]

All of sudden my pistol won't function standard velocity ammo???

It'll work with high velocity 40gr ammo and sketchy with the 36gr.

I replaced the extractor less than a year ago and the buffer seems to fine except for slight marks on it, however its the original one since I bought it in the 90's.

It seems to feed well and extract well.

What do you think the problem is?

Thanks for any help. 

[truckcop 32]

You tell us; what's the problem?  What is it doing wrong?  It feeds and extracts.  What is it not doing that it should be doing?

Edited December 18, 2020 by truckcop

[Gunman123 0]

I'm guessing the bolt isn't coming back far enough??? Most of the time the empty casing will still be in the chamber. This is with the same ammo it used to function fine with. Geco, Aguilla, RWS, all standard velocity $6 a box ammo.

I cleaned and lubed everything real good a couple times but that didn't fix the problem. 

I'm kinda stumped at what it could be. It's like something is worn and isn't letting the bolt back fully anymore with standard velocity ammo, like it doesn't have enough oomph anymore. It works with high velocity Remington bulk ammo which I would rather not use since this is more of a match pistol. 

[Sukhoi_fan 51]

Have you considered making an inquiry with the source, i.e. Benelli USA?

[Gunman123 0]

They'll probably say to send it in which I suppose I'll have to do at this point anyway.

[jimbo45 29]

Start with the recoil spring would be my thought

[GTTom 24]

From a quick search online I read on Brian Enos' forum "the synthetic recoil buffer needs to be replaced often in order to keep it reliable. The buffer acts as a spacer that keeps tension on the recoil assembly; if it wears out you'll have cycling problems."

Larry's Guns Inc from Maine seems to be the goto supplier for the target shooting crowd for MP95 parts.

 

Edited December 19, 2020 by GTTom

[Gunman123 0]

3 hours ago, jimbo45 said:

Start with the recoil spring would be my thought

That was my first thought too, and thanks.

I probably shouldn't have but I cut a few coils off the recoil spring, it didn't help.

[Gunman123 0]

1 hour ago, GTTom said:

From a quick search online I read on Brian Enos' forum "the synthetic recoil buffer needs to be replaced often in order to keep it reliable. The buffer acts as a spacer that keeps tension on the recoil assembly; if it wears out you'll have cycling problems."

Larry's Guns Inc from Maine seems to be the goto supplier for the target shooting crowd for MP95 parts.

 

I think I saw that post in my research. Even thought the buffer looks good I should replace it anyway. It would be odd if that solved the problem but??????

[jimbo45 29]

New spring and buffer will likely fix your issues