Jump to content

benelli m4 collapsible


rubicon20032003

Recommended Posts

Hold the unlock button in while doing the install. 
 

The stock should install onto the receiver extension at about 45 degrees rotated to the left. The stock should slide on, then stop. Rotate the stock 90 degrees to the right until the stock stops. Now you should be able to slide the stock up and down the receiver extension assuming you have a 3 position receiver extension. If you only have a one position extension, the stock will only pull out a short ways, then rotate 45 degrees to the left. 

Think of the adjustment notches as gears in a manual transmission. 

Link to comment
Share on other sites

9 minutes ago, StrangerDanger said:

Can you post pictures of the receiver extension? Are the steel pins present in the collapsible stock? 

 

If you have another M4, try installing the stock on it to see if it functions correctly. 

Photo for reference. Note the steel pin just to the left of the unlock button.

0wN3nNv.jpg

Nope no steel pin there .there’s a pin in top .I took out B7F598E2-E591-44CD-8D02-B6D08127922A.thumb.jpeg.3c0690ef00239f500bd924e2209ada8b.jpeg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...