Jump to content

Field stock for m4


Jaason0

Recommended Posts

It's pretty easy.  Just remove the BCG and trigger assembly then unscrew the current stock from the receiver extension (buffer tube).  The field stock will screw onto the receiver extension -- no tools required.  The challenge will be to get the new stock perfectly lined-up against the receiver as you tighten it down so the trigger guard will drop into place easily.  

The butt pad can be swapped out by using a medium size Phillip's head screw driver inserted into the fine slots in the butt pad.  The screws will remain captured in the pad.  You might want to use a little Vaseline or spit on the screw driver head to make insertion easier.  That last line is good advice for many applications!

  • Upvote 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...