Michael Singer Posted May 2, 2021 Share Posted May 2, 2021 Hi, Is there a QD mount for the Benelli 61171 Supernova Collapsible Stock? Thanks, Mike Quote Link to comment Share on other sites More sharing options...
M2_shootr Posted May 2, 2021 Share Posted May 2, 2021 I’ve considered adding one, haven’t gotten that far. The polymer has an indent for one, would just need to fit a socket into the stock body Quote Link to comment Share on other sites More sharing options...
M2_shootr Posted May 3, 2021 Share Posted May 3, 2021 The MagPul socket fits. Will need to open up the molded dimple in the stock body. 1 Quote Link to comment Share on other sites More sharing options...
M2_shootr Posted May 3, 2021 Share Posted May 3, 2021 https://www.primaryarms.com/magpul-sling-mount-kit-type-2-mag332 Quote Link to comment Share on other sites More sharing options...
MrFootball Posted August 16, 2022 Share Posted August 16, 2022 On 5/3/2021 at 7:39 AM, M2_shootr said: The MagPul socket fits. Will need to open up the molded dimple in the stock body. Looks great @M2_shootr! I'm looking to do this with my Supernova collapsible stock. I've got the Magpul QD socket. For the Benelli stock, It looks like you have either drill it out or Dremel it? Any helpful tips? How did you do it? Quote Link to comment Share on other sites More sharing options...
M2_shootr Posted September 19, 2023 Share Posted September 19, 2023 (edited) @MrFootball sorry, I just now saw this. Are used to Forstner bit in a drill press. The stock body was supported by an epoxy to sit nicely in the vise. Once it was poured out, I switch to the other side and did the same. And then you some JB Weld and filled the cavity. The cups were then pressed into position Edited September 19, 2023 by M2_shootr Quote Link to comment Share on other sites More sharing options...
nyc71 Posted September 22, 2023 Share Posted September 22, 2023 I put a Noveske on mine https://noveske.com/products/flush-qd-sling-mount/ 2 Quote Link to comment Share on other sites More sharing options...
M2_shootr Posted September 22, 2023 Share Posted September 22, 2023 On 9/19/2023 at 3:56 PM, M2_shootr said: @MrFootball sorry, I just now saw this. Are used to Forstner bit in a drill press. The stock body was supported by an epoxy to sit nicely in the vise. Once it was poured out, I switch to the other side and did the same. And then you some JB Weld and filled the cavity. The cups were then pressed into position Damnit……typos stock body was supported by an epoxy bed. I made to support it in the device while drilling. Once the left side was drilled out, I flipped the stock and repositioned to drill the other side. and then use some JB weld to fill in the cavity and to seat the QD cups Quote Link to comment Share on other sites More sharing options...
CEBEP Posted December 13, 2023 Share Posted December 13, 2023 On 9/22/2023 at 9:17 AM, nyc71 said: I put a Noveske on mine https://noveske.com/products/flush-qd-sling-mount/ Are you still happy with this setup? Quote Link to comment Share on other sites More sharing options...
nyc71 Posted December 14, 2023 Share Posted December 14, 2023 7 hours ago, CEBEP said: Are you still happy with this setup? I am but im replacing it with a field stock that I'm having shorten. I don't like pistol grips on shotguns. Quote Link to comment Share on other sites More sharing options...
CEBEP Posted December 14, 2023 Share Posted December 14, 2023 42 minutes ago, nyc71 said: I am but im replacing it with a field stock that I'm having shorten. I don't like pistol grips on shotguns. Thanks. And location is good? I assume it should be on the upper side of the stock on opposite side for correct usage? I don’t have much experience with shot guns. Quote Link to comment Share on other sites More sharing options...
nyc71 Posted December 14, 2023 Share Posted December 14, 2023 2 hours ago, CEBEP said: Thanks. And location is good? I assume it should be on the upper side of the stock on opposite side for correct usage? I don’t have much experience with shot guns. Correct. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.