Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Benelli Forums
Sign in to follow this  
BenelliSBE

Trick to allow 4 shells in the mag of an SBE.

Recommended Posts

Hello,

Does anyone know a trick to allow the stock magazine in the SBE to hold 4 shells instead of 3? I heard that you would need to take the spring out and cut it a bit. (Doesn't sound right or good to me). Thanks for any ideas.

Share this post


Link to post
Share on other sites

It should say in the manual, my Benelli has it in there. Basically if you take the barrel off along with the retaining nut you should see a horseshoe shaped retainer with two small holes next to the split. You heed to compress this retainer using a pair of needle-nose pliers. Make sure that you are careful because there is quite abit of pressure behind it (you will need to keep pressure on it with your finger until you can slowly start to let it off, probably wear a pair of glasses while doing this just to be safe). when you get it off you should have access to the plug, which is the 3 inch or so piece of plastic. take it out and reassemble and your set!

 

Let me know how it goes

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...