DeadlyBenelli Posted January 28, 2006 Share Posted January 28, 2006 I hope that someone can help me out with this annoyance. I haven't heard of anyone having this problem with there SBE. What happens is that after shooting all three rounds (wich has never failed me) I have to close the action without dropping a shell in. then load the mag and pull the action back and drop one in. If I drop one in hit the release and then try to load the mag it will not go into the tube. The shell goes in at too steep of a pitch and gets wedged about half way in. Almost like the bottom of the ramp (right terminology??) is at the wrong angle. I bought the gun in November and it started doing this in December. Any thoughts??? Other than this annoyance the gun has treated me well. Quote Link to comment Share on other sites More sharing options...
tucker301 Posted January 30, 2006 Share Posted January 30, 2006 I drop one directly into the chamber, then close the bolt and feed two more into the mag. Never had a problem. Quote Link to comment Share on other sites More sharing options...
BLACK JACK Posted January 30, 2006 Share Posted January 30, 2006 It sounds like the bolt is not closing all the way. If the bolt head does not rotate into its slot the shell carrier will not go all the way up when you feed a shell into the mag. Quote Link to comment Share on other sites More sharing options...
zemzabob Posted January 30, 2006 Share Posted January 30, 2006 I have to agree with "Black Jack" check your bolt to be sure it is rotating when closed Quote Link to comment Share on other sites More sharing options...
DeadlyBenelli Posted January 31, 2006 Author Share Posted January 31, 2006 Thanks, guys. I'll giver her another look. Quote Link to comment Share on other sites More sharing options...
HAVE GUN WILL TRAVEL Posted January 31, 2006 Share Posted January 31, 2006 I also agree with Black Jack Al Quote Link to comment Share on other sites More sharing options...
DeadlyBenelli Posted February 1, 2006 Author Share Posted February 1, 2006 I haven't had the gun out shooting, since the seasons have now closed But I simulated it. I closed the bolt but didn't let it rotate all the way and tried to load a shell. It did exactly the same thing that I was having problems with. I just gotta make sure I don't ease the bolt forward as that was what I was doing and that was hindering the full rotation of the head. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.