Liberty or death Jr. Posted November 26, 2006 Share Posted November 26, 2006 Hey, while I was cleaning my nova, the magazine tube assembly came out and flew all over the place. I got all but one part which is the little cap that you can see just before you load some shells in. I have spent the last 5 hours looking for it but I can't find it. Does anyone know where I can find a replacement? How much do you think it will cost and how long will it take to get to me? Thanks Quote Link to comment Share on other sites More sharing options...
Full Bore Posted November 26, 2006 Share Posted November 26, 2006 I believe the part you lost is the magazine follower by the way you describe it. It is #35 on the schematic. Brownells would probably be the fastest. Heres the link. http://www.brownells.com/aspx/NS/schematics/schemmfg.aspx?schemid=506&m=1&mn=Benelli+U.S.A.%c2%ae&model=Nova+ Quote Link to comment Share on other sites More sharing options...
Liberty or death Jr. Posted November 26, 2006 Author Share Posted November 26, 2006 Thank you, that is just what I was looking for. Quote Link to comment Share on other sites More sharing options...
d Posted November 26, 2006 Share Posted November 26, 2006 where were you cleaning it? it has to be somewhere. it is about the size of a 2 liter soda bottle cap right? Quote Link to comment Share on other sites More sharing options...
Liberty or death Jr. Posted November 26, 2006 Author Share Posted November 26, 2006 Thats what I thought. I was cleaning it in my living room, (very small living room) and can't seem to find it anywhere. Does anybody have a picture of a recoil assembly that shows colors and everything? After looking at the schematics I am not sure if I am missing a part. So far I have a black cap, a red cap, a plug and a spring. I think I should have 2 red caps, a spring, a plug and a black cap. Quote Link to comment Share on other sites More sharing options...
d Posted November 26, 2006 Share Posted November 26, 2006 are you refering to the mag tube assy? you should have a red follower (closed at one end and open at the other, like a soda cap) then a spring, then a black spring retainer (cap that is partially bisected to allow it to fit in tube and prevent spring from shooting out when end cap is removed) and finally a much larger than anythin else endcap, open on one end and internaly threaded. good luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.