Mark A Thompson Posted September 11, 2004 Share Posted September 11, 2004 Just purchased a Black Eagle II, in the Matte Black Finish, and would like to know what is best to clean the barrel before assembly??? It appears to be a grease ,that the regular cleaning doesn`t remove. thanks Mark Quote Link to comment Share on other sites More sharing options...
sleepydoc Posted September 11, 2004 Share Posted September 11, 2004 I like using borescruuber for my initial cleaning and then for metal parts I really like electrical contact cleaner, avaiable at electronic or auto parts stores. It remooves all grease and residue and does not leave anything behind. After that a DROP of teflon based oil on metal to metal contact rails and just a wipe with an oily cloth on metal. Ditto for the barrel. I also like to get silicone gel packs I save them from items that I puuchase, heat them in an oven at 150F for about half an hore to regenerate them. Put them in a cloth sac or old cotton tube sock and leave them in you gun case. The sock I usually leave oiled lightly on one side( just a spray) so I use it to wipe down the gun after each day. Use a case with a gasket too. Paul Quote Link to comment Share on other sites More sharing options...
threeshot Posted September 11, 2004 Share Posted September 11, 2004 Mark, I am happy with the following products to clean and lube my SBEII. M-PRO 7 to clean the gun. I purchased Slip2000 Piston & Choke Tube Cleaner and use FP-10 for oiling the gun. Shooter Choice is licensed to use the FP-10 oil. You can get FP-10 Lubricant at Brownells stock number 934-110-004. CheaperThanDirt also carries the FP-10 oil. BTW: Are you talking about the outside of the barrel or the inside of the barrel? Hope this helps. -threeshot Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.