Jump to content

Complete Stock Disassembly SBII


NJgunner

Recommended Posts

It's a simple operation that would not generally require a step by step guide.

 

Remove the recoil pad

Remove the stock retaining nut (this requires a metric socket - I believe it's 13mm)

Remove the locking plate noting its orientation

Slide the stock off and collect the shims, noting their orientation

 

If you want to remove the stock retaining nut screw, you'll need to heat the assembly to loosen the loctite. Do not use a torch. Hot water will work.

 

Post back if you need instructions on how to re-assemble. :rolleyes:

Link to comment
Share on other sites

It's a simple operation that would not generally require a step by step guide.

 

Remove the recoil pad

Remove the stock retaining nut (this requires a metric socket - I believe it's 13mm)

Remove the locking plate noting its orientation

Slide the stock off and collect the shims, noting their orientation

 

If you want to remove the stock retaining nut screw, you'll need to heat the assembly to loosen the loctite. Do not use a torch. Hot water will work.

 

Post back if you need instructions on how to re-assemble. :rolleyes:

 

Sounds pretty simple just wanted to disassemble the srping from the recoil tube, clean both of them out

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...