NJgunner Posted September 29, 2008 Share Posted September 29, 2008 I put my SBII back together after taking apart recoil plunger/spring. The stock shim for right hand model says DX in the upper left, the piece that coresponds is either A DX or B DX which is stock? Quote Link to comment Share on other sites More sharing options...
HOGWILD Posted September 30, 2008 Share Posted September 30, 2008 I put my SBII back together after taking apart recoil plunger/spring. The stock shim for right hand model says DX in the upper left, the piece that coresponds is either A DX or B DX which is stock? probably the 3 you did not take outta the plastic bag would not be stock?. mine came with the following per my manual and can't remember which one came installed z=50mm+-1 a=55mm+-1 b=60mm+-1 c=65mm+-1 the could have put any of them in their? dx= right hand sx= left hand so if it came as a rt handed gun the locking plate was for sure a DX the size shim really depends on your gun fit and pattern work! some people even use 2 shims due to shooting high! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.