DAdams
-
Posts
19 -
Joined
-
Last visited
Posts posted by DAdams
-
-
They are hard to find and if you do find one they cost a ton. Have you thought of just replacing the magazine tube with a true seven round tube?
-
I am running a special on my M4 seven round tubes. They are now $175 plus shipping.
-
I am relatively new to the M4, but now I am even more confused.
Mine is a California bought model. It holds 3 in the tube and one in the chamber. I see that Dadams sells extensions to hold 7, using the factory spring.
However, the above posts refer to the extension adding 2 rounds, and can use the factory spring. So, the means you guys are having your models hold 5 rounds from the factory?
What all do I have to do to make a CA model 7 rounds?
Call Benelli and ask if your magazine spring is the same as the five round models. If so just order a seven round magazine tube. If not, order the correct spring from Benelli. It won't cost much. You can then order a seven round tube and you will be fine.
-
I will need a money order or certified check. If you will send me an e-mail, I will give you all of the information that you need along with telephone numbers to contact me if you wish. The shipping should only take two to three days depending on where you are located. Thanks.
-
I have added the pictures again by another method. Click on the link and then view slide show to see all pictures. If there are any further problems let me know. Thanks.http://www.kodakgallery.com/I.jsp?c=cdct1u3.lb7z957&x=0&h=1&y=-z1lyf4
-
If you are using a two round extensions the factory spring should work fine. It is the same one that they use with factory two round extensions. You may need to send the gun back to be checked.
-
If there are any further problems with the pictures, I will be happy to send the pictures via e-mail. Just shoot me an e-mail and I will respond.
-
I have no idea what the problem is. Sometimes the photos are on the forum and other times they are not. I am unable to add new photos due to an unknown problem with the forum.
-
You're links aren't working.
I don't know what is going on. I added the links and checked them. They were working fine. I will have to check with Benelli again. Thanks for the help.
-
Click on link to view photo.
-
Click on link to view photo. The next photo is on page two.
-
http://www.kodakgallery.com/I.jsp?c=cdct1u3.lb7z957&x=0&h=1&y=-z1lyf4 Click on link, then view slide show to see all photos.
-
There is some type of problem with uploading attachments. It may take a while to upload pictures of the tubes. I spoke with Benelli and the female that helped design the forum. She said that she would try to find out what the problem is and get back with me. Sorry about the delay.
-
Good idea, I just have not had time. I am a full time Deputy Sheriff and I'm on S.W.A.T. My partner runs a full time machine shop. We will try to get pictures down loaded asap. We stand behind the tubes 100% and if you are not happy you will get a full refund minus shipping. Thanks for the input.
-
Yes, they will work fine. I have one installed on mine. The factory spring and keeper will work with the tube as well. You do not have to change the spring it is the same spring used with the factory seven round tubes.
There was a question asked by private message, if the tubes are six round tubes or seven round tubes. The tubes are seven round tubes which gives you seven rounds in the tube and one in the chamber.
-
Yes, they will work fine. I have one installed on mine. The factory spring and keeper will work with the tube as well. You do not have to change the spring it is the same spring used with the factory seven round tubes.
-
Is there anyone looking for new U.S. made, full length, seven round M4 magazine tubes ? I have a dozen for sale at this time and will be making more. They are top quality tubes that are parkerized and gun koted to match the M4 finish. The price is $225. plus shipping. Buy ten or more and the price is $175. each plus shipping.
M4 Magazine Tubes
in Shotgun Sports
Posted
I have 11 tubes left and do not have time to make more. I have reduced the price to $150.00 each plus shipping. You can email me for further information.