the supernuge
-
Posts
5 -
Joined
-
Last visited
Posts posted by the supernuge
-
-
Not yet. Thought I would ask the experts first! ;')
-
I don't think it's me. I have been using a pump for almost 30 years and this gun for over two. Is there a known condition that would cause malfunction after a few years etc?
-
Novakink,
I don't think I am. I have never had this issue with an 870. Can you do that on an 870 and get away with it?
I can tell you I have cleaned the firing pin well. I did notice that the little pinstop that holds it in place has a small rubber washer. That washer is damaged on one side. I don't think that would matter but worth mentioning.
Thanks in advance,
-
I have a 3 1/2 Nova which is starting to give me some trouble. What I can only describe as feeding and loading issues are plaguing me. I bought this gun for one reason and one reason alone. This is my waterfowl gun. I expect it to get wet, dirty, muddy (within reason) and it still perform.
This season I have had several situations where upon trying to fire a follow up shot I get a "misfire." Let me qualify this. The follow up shell is racked, seated and the trigger pulled. The shell does not fire. As with any "fault condition" I eject the "bad" shell as I would with any firearm upon malfuction. The next and third shell is then racked and seated. It fires fine.
As I examine the second "misfire" shell I see that it had not been struck by the firing pin. If the shell is clean, I will use it again with no ill effects.
That is issue #1
Issue #2 is even more recent. Upon loading three rounds and racking the first round I pulled up to fire. Nothing. It was as if the safety was on. The bird passed, I tried to clear the condition. I brought the shell back with the slide and rammed it home again. This time it fired.
My question(s) is this:
Am I doing something wrong or do I need it repaired?
Can a Benelli be made to slide upon fire like an 870 or not?
Thanks in advance,
The Nuge
Issues with Nova Opperation again
in Benelli
Posted
Could that cause an issue?