Butters149
-
Posts
20 -
Joined
-
Last visited
Posts posted by Butters149
-
-
ah ok thats good to hear. I think I've had it for half a year and only shot about 20 rounds out of it.
-
How often do you do a tear down to clean and lubricate the M4?
-
On 10/17/2020 at 1:57 PM, GTTom said:
Follow up on this thread: I contacted Briley tech service and they sent me a CAD drawing of the One Shot with measurements. It was a 1:1 sketch so I printed it, cut it out and using it as a template it looked like it would fit. Ordered the One Shot extension and it came in last week. it FITS! For clearance I have to install the One Shot extension first then screw in the Carlson choke. Just enough clearance doing it this way. Now that it it fits I had to address the issue of not getting the last round in the magazine. Thanks to the info from @Birdog19 post in this thread I was able to shorten the magazine spring without a lot of trial and error. Shortened the spring to 16" sticking out of the magazine and it fit 8 rounds but it felt like the last round was binding the spring just a bit. Cut the spring back to 15" and it leaves some clearance after the last round. Good to Go! I'll hit the range tomorrow and runs dome rounds through it. Pretty happy with the outcome though.
quick question, once you twist the extension off, does the spring come out or is there a c clip in place?
-
59 minutes ago, StrangerDanger said:
Correct. You rarely need to clean inside the magazine tube.
https://www.briley.com/p-63665-benelli-m4-one-shot-extension.aspx this is the only part at the end that twists.
-
I just realized I don't need to remove the spring and c-clip just to take out the upper barrel to clean right? Just need to remove the end cap, but the spring won't pop out.
-
Hi everyone,
I had upgraded my benelli to use the Briley magazine tube and extension as well as their spring. When my friend put it together he said the tension was really high, I was wondering what is the best and safest method for removing the spring for maintenance? Thanks,
-
I circled the parts in red, just wondering what it’s Called and where to get them. Thanks
-
Got it I have an idea. Is the button easy to remove from the stock?
-
7 minutes ago, Vertigofirearms said:
Pretty much you take the stock apart and drop a pin in. You can reassemble or modify the button to be easier to limit.
https://www.calguns.net/calgunforum/showthread.php?t=1507997
Another option:
The one from cal guns look nice, but I don't think he's making them anymore.
-
45 minutes ago, Vertigofirearms said:
If you go that route, you can buy an extra button in the event you mess up the hole.
Any instructions for that route?
-
-
hmmm
-
Hi I was wondering if there was a kit or a diy on how to pin the m4 c-stock? I got one coming and I live in California so that’s why I need to pin it some how.
-
You have the a zooms?
-
Hi just wondering what’s the best brand of snap caps for Benelli m4 is? I heard A Zooms were good
-
4 minutes ago, Vertigofirearms said:
Buy some dummy rounds and practice loading. You might want the longer shell lifter. I've personally never had a thumb bite from the M4 lifter, but many do.
You might want to replace the bolt release button. Most people do that as well.
Do you have a link for the bolt release button? Can't seem to find it on their site.
Found some dummy rounds on Amazon, these good? https://www.amazon.com/Ultimate-Arms-Gear-Cartridge-Ammunition/dp/B00RG6RI56/ref=sr_1_1?dchild=1&keywords=shotgun+dummy&qid=1594140848&sr=8-1
thx
-
HI everyone,
I'm excited to find a Benelli M4, I will be picking it up after the background check. In the mean time I am sourcing some parts, most so far are from Freedom Fighter Tactical since they are in stock and local. Just wondering how the parts are from them? Below are what.I plan to start with, anything I am missing? thx
M4 - MESA TACTICAL ALUMINUM SIDE SADDLE - 6 round
Urbino Stock with Limb Saver and Cheer Riser
M4 - MESA TACTICAL TRUCKEE™ FOREND 11"
M4 - FFT FINISHED TITANIUM NO-SPIN CHARGING HANDLE FOR BLACK SHOTGUNS
M4 - FFT / WOLFF PREMIUM HIGH POWER MAGAZINE SPRING
M4 - FFT FINISHED TITANIUM FULL-LENGTH
-
Where can I get that kit?
-
I’ve seen them sold out all over. I live in California and was wondering if it’s still legal if I Pin it.
Briley Magazine spring length?
in Benelli
Posted
Hi, I have the Briley mag tube extension with the +1 extension and their spring. I was just wondering how long should the spring be? I was running it at their stock length, which seems to be ok so far, but have seen some people trim it down.