[Benelli M4 -- Rear Sling Plate Removal]

I also did not need a vise, or a heat gun.  My aircraft plastic nut was not that difficult to remove.  It did have some locktite on the stud threads

I cleaned off the old loctite and I will not locktite a plastic nut for reassembly. I feel this is not necessary for an aircraft plastic nut.

I am going to install a Limb saver new butt stock pad and call it good.

Noveski QD end plates are a little difficult to find. I bought mine from Freedom Fighter Tactical.  I mounted the QD side

of the end plate on the right side of the stock.  I think Todd from FFT are now making these plates themselves. They go for around $ 72.00

 

[Benelli M4 -- Rear Sling Plate Removal]

I removed my original end plate using this similar method and installed a Noveski QD end plate.

The only thing different I did was I double nutted the the pistol grip side and then locking the two 8 mm nuts together

I was able to use a ratchet, extension &  (13MM) socket to back the stud out from the pistol grip side of the stock.

These pictures and diagrams were very helpful in figuring out how to dissasemble.

Thanks so much!